1) Inside dimension: 12000×4500×3500 mmL×W×H2) Outside dimension: 12150×6190×4100 mmL×W×H3) Basement: Without basement or floor. 2 rows of pits in the ground for exhaust air, dimension of each pit is 10000×750 mm(L×W)4) Main door: 3-folds, 3300×3400 mmW×H,Colour: same as room body5) Escape door: 1-fold, 700X2000 mm (WXH), Colour: same as room body 6) Wall Panels: thickness: 70 mm,Widthh:1150 mm, tongue and groove structure, made by 0.426mm colour steel with polystyrene(EPS) inside, colour: optional (red, orange, blue, white).7) Lighting : Ceiling Lights:16Unitsx4Pcs=64Pcs×36WSide Lights: 10Unitsx4Pcs=40Pcs×36W, vertically set.Illuminance: ≥450LUX8) Glass: All glass is clear tempered glass. 9) Generator setting: intake air from side upper direction, exhaust air from rear side direction, quadrate steel frame, outside is coated steel, inside is galvanized steel, colour: optional10) Intake and exhaust air system: 2 units, in total 4×4KW centrifugal fans for intake air, model YDW4.5L, air capacity is 12500m3/h for each fan; 2×7.5KW centrifugal fans for exhaust air, model TAE-500H, belt-drive, air capacity is 20000M3/H for each fan. 11) Heating system: 2 pcs RIELLO RG5S oil burners, 260000 Kcal/pc, 2 stainless steel heat exchangers, 2 electric dampers from spraying to baking cycle. Highest working temperature: 8012) Filtering system: Pre-filter, high efficiency filter(ceiling filter),floor filter(fibreglass), M-shape active carbon filter, extract fibreglass filter taken out by level side.13) Roof Plates: 50mm thick EPS wall panels.14) Control box: lighting switch, spraying, risen-temperature spraying, baking, baking temperature, time setting, failure indicator, temperature control meter, power switch, emergency stop, hour meter, limited-temperature device.15) Free air speed: >=0.25m/s16) Total Power:34.7 KW

Industrial spray booth