1.There are two function of it -- Flash& Video. 2.Use with the R2 Cree for the LED lamp. 3.There are four work moul

Features:

1.There are two function of it -- Flash& Video.2.Use with the R2 Cree for the LED lamp.3.There are four work mould.

There are more features as follow:

LCD Screen Function1.FLASH/ON:Flash light mode,video function close.LED1 lighting(thereinto LED lighting)choose OFF can close LED1, adjust POWER can control the flash light output power.LCD screen flash output power will show 2.0-6.0 of the max output.2.FLASH/OFF:Video Mode,choose LED1will lighting a LED lamp in the  middle, choose LED2 will lighting all the lamps.LCD screen will show the  LEDS number from 2.0-6.0,2.0 is the smallest,6.0 is the lightest. 3.BUZZ/ON:Open Buzzer;BUZZ/OFF:Close buzzer.4.Prevent IR Choice :   M:Camera Hotshoe Flash,X line Flash, Hand Flash,Wireless control Flash.   S1:IR  Flash.   S2:Ready-flash . IR Flash, The light continuous flash twice, the second time         Flash.   S3:Continous-flash function,Camera Hotshoe Flash,IR Flash,X line Flash,         Hand Flash,Wireless control Flash.Everytime can flash 5 times.   S4:Continous-flashfunction,Camera Hotshoe Flash,IR Flash, X line Fash,         Hand Flash, Wireless control Flash.Everytime can flash 15 times.5.Counter:when flash one more time that the counter will add a time.

Using Way:1.Put it into the hot shoe jack of camera or insert to other equip- ment,lock the fastness button,Adjust you need the angle.2.Fit the right batteries or put the exterior power. Turn on the power switch, LCD screen will light,charge introduction sheet will show.When finished charge the sheet will stop and  buzzing.Modelling light(in the middle of LED)willl light. The light will be stand by.3.Deasil turn POWER BUTTON,the light's power will increase.Anticlockwise it will reduce.4.Press UP/DOWN BUTTON,the menu function will light. Continous to press it will lightup or down  rotative. Choose you  need the function that press L/RBUTTON. Then one of function  will light. Continous to press it will light left or right rotative.Choose you need thet press ENTER BUTTON(OK)is finished.5.Press the TEST BUTTON that can do the manual test.

Using Filter:    You can use the 4 pieces of filter to adjust the angle that can reach the perfect exposal.Or can use the color filter to adjust the color temperature you need.FM Wireless Control:   The light is set up the wireless receiver,you just set the transmitter on the camera.Press shooting that can use the flash light and flash at the same time. To reach long distance,not obstruction,strong lighting for shooting.

Setting Battery:   Slide picture A1 to put battery into,slidepicture A2 to change battery.Install and Remove the Flash Light:   Put the flash light into the hot shoe jack of camera.Follow B1 tolock it.Remove it that please follow B2 to lock, then the light will out of the hot shoe jack.Power Supply Method:   The light can use AA battery,Sony 550,750 battery, Car ChargerAC 110/220V power. C1,C2 are the car charger and AC power picture.

Studio Treasure, Dison Genius, Camera Flash Light,Camera Strobe Light,Led Video Light, Photographic Equipment,Led Camera Light