Swing Gate(Turnstile)
Swing Gate(turnstile), integrating with mechanism, electron, microprocessor and various identification technology, by configuring all kinds of identification devices and adopting reliable safeguard devices, alarm devices, direction indicator and well-extended LED counting display, is able to achieve acess intelligentized control and management. Intelligent swing barrier being compatible with such card reader devices as IC card, ID card, bar code, fingerprint is able to effectively manage the entrance and exit and provide people with civilized, orderly transit manner. It could be wildly used in the place where intelligentized management is needed such as station, port, subway, factory, mansion, intelligent community, hotel, club,marketplace, enterprise and institution etc.
Function and characteristics:
With function of self-examine and alarm,it is convinient for maintain and use.
being able to program operation status by the small keyboard in the main board
Preventing pedestrians from being nipped and from hurt
Arms are automatically locked untill opening signal is received.Arms synchronization (adjustable)Automatically reset function: It will automatically lock if the pedestrian hasnt pass through the channel in the pre-set time after the opening. The passing time is adjustable.
Unit can be adjusted permanent open or close when power off to meet different requirement.Several card readers are attachable, and relay singals can be received.One direction or bi-direction are optional
It can be directly controlled and managed by remote computerAutomatic prolong time reset,the default time is 10secondsThe swing barrier automatically opens after power off and automatically closes when power on, which accords with fire-fighting.
Extendable functions:Light and voice alarm function, include the illegal in and being nipped
Count
Infrared reset function
The length of casework and arms is optianal.
Main structure and configuration:
Standard framework 1
Arm 1
Controller 1
Direction indicator 1
Transformer 1
Electromotor 1
Technical parameters:Framework material: State standard 304 stainless steel
Framework size: 380*280*1000(mm)
Length of arm:600-900mm
Weight: 40KgSwing direction: single or doubleWorking voltage: AC220 ±10% V/50 ±10% HZ 110V 60Hz
Driving eletricmotor: DC eletricmotor 200w/24v
Communication interface: Rs485 standard Distance less than 1200metresLED indicator: 1 card reader window: 2Transit speed: 40 persons/min(open often), 25-30 persons/minTime for opening or closeing: 2-3secondsStarting time after power is on: 3 secconds
Automatic reset time after fault: 10seconds
Working environment: indoor, outdoor( with a tent over) Temperature: -10 50
Relative humidity: ≤90% never coagulated
Swing barrier Gate