n-methylaniline(nma) NMA Fine Intermediate Appearance:Light yellow or brick red liquid n methyl aniline CAS100-61-8

n-methylaniline(nma) CAS100-61-8

n-methyl anilineNMAFine Intermediate 

   

Monomethylaniline

In the age of modern technology using orthodox methods of producing high-octane gasoline is increasingly unprofitable, so many companies today are looking for solutions to optimize the production process and save resources without sacrificing quality. If you want to keep up with the times, we offer a high-performance fuel additive monomethylaniline (MMA). By mixing this additive (MMA) with the gasoline, your output will be high quality unleaded gasoline with the specified octane.

Monomethylaniline - it octane additive, widely used in gasoline worldwide. In our country, many companies also have adopted this technology. This is not surprising, because the MMA provides a high-quality Gasoline 80 and Regular-92 from the gasoline without adding additives. The quality of gasoline is fully consistent with state standards. When added to a mixture of naphtha and monomethylaniline metallic additives you get premium quality gasoline-95. Fuel additive monomethylaniline certified and permitted for use in the Russian Federation and CIS.

With the introduction of 1.5-2.5% in gasoline monomethylaniline increases its octane number by an average of 6 points, depending on the fractional composition of the propellant used, and other additives. In addition, MMA improves the performance characteristics of gasoline, such as:

Monomethylaniline improves the stability of gasoline, including transportation and storage;Reduces the cost of maintenance for gasoline storage tanks;N-methylaniline reduces tar formation during storage of gasoline;5-7% reduction in fuel consumption per 100 kilometers;Reduces exhaust emissions (CO and HC) by 20-30%;Reduces the costs of the car.

Technical and economic calculations, use monomethylaniline more economical than the use of MTBE (methyl tertiary butyl ether). Savings up to 30%, due to the following factors (in comparison to MTBE):

Monomethylaniline more efficient;Savings on delivery, by reducing transport costs. This is due to the fact that 1 liter of MMA replaces 6-8l MTBE.

The mixing is carried out by a pump in the tank, by 2-fold mixtures monomethylaniline circulation and gasoline fraction. Keep the product is necessary in a closed container, protected from sunlight.

Key indicators monomethylaniline

Standard: TU 2471-269-00204168-96.

 Parameters according toNorm standard

1	Appearance: Transparent oily yellow liquid, a reddish tint	match
2	Mass fraction of N - methylaniline,%, not less	98.0
3	Mass fraction of aniline,%, not more	0.5
4	Water content,%, not more	0.2
5	Mass fraction demetilanilina,%, not more	1.3
6	Density at t = 200C, kg/m3 at least	97

ITEMS                                   SPECIFICATION  Appearance         Light yellow or brick red liquid        Light yellow or brick red liquid N-methyl aniline                ≥ 98.0%                                   ≥ 96.0%  N,N-dimethyl aniline          ≤1.0%                                     ≤ 3.00%  Aniline                                ≤ 1.0%                                     ≤ 3.50% Color: yellow to brown  Odor: characteristic odor - sweetish odor pH:7.6@1g/l aq.sol. Vapor Pressure: 0.4 mbar @ 20 deg C Boiling Point: 195 deg C @ 760mmHg ( 383.00°C)  Freezing/Melting Point: -57 deg C ( -70.60°C)   Autoignition Temperature: 500 deg C ( 932.00 deg F) Flash Point: 86 deg C ( 186.80 deg F)  Solubility in water:30 g/l in water Specific Gravity/Density: 0.987g/cm3  Molecular Formula: C7H9N Molecular Weight:107.15 

n-methylaniline(nma) CAS100-61-8