1. It adopts cast aluminium alloy shell, with light structure. 2. It adopts chemical fiber filter element.

This Y tube type filter is installed on the return opening of hydraulic pump to filter oil in the hydraulic transmission system.

Its features: Y tube type structure is so simple that it is easy to replay filter element.

General oil filter for oil section is installed inside the oil tank and you must open the oil tank when replace filter element. Y tube type filter is installed closed to oil suction directly (outside oil tank), you only need to open the top cover of the filter when replace filter element. When Y tube type filter is installed on the return opening, you don’t need to disassembly the piping when replace filter element.

1. This oil filter is used for return opening of hydraulic system.

2. It adopts cast aluminium alloy shell, with light structure, working pressure is 1.6 Mpa.

3. It adopts chemical fiber filter element, absolute filtration precision can reach 5.10 microns

4. With a pressure differential warning device, when pressure difference of filter import and export reach 0.35 Mpa, it will send a signal, showing filter element already jams, should be replaced filter element.

Model	Nominal Flow (L/min)	Original Pressure Difference Loss(Mpa)	Absolute Filtration Precision (Microns)	Weight
YQ2U-A25X*S	25	≤0.05	5     10	3.45
YQ2U-A40X*S	40
YQ2U-A63X*S	63	≤0.08		6.2
YQ2U-A100X*S	100
YQ2U-A160X*S	160	≤0.12		9
YQ2U-A250X*S	250

Remark:

S : pressure differential warning device

*: Filtration Precision

Y Tube Type Oil Filter (used for return opening )