1.has a good adhesion 2.impact resistance 3.best for oil filter 4.attend the auto exhibiton 5.the color as your request     

Two-component room temperature curing filter adhesive component proportion ratio is 6:1
	Material-A	Material-B
Physical nature	White Viscous liquid	Black
Color	Based on your request to configure
Viscosity	30-45kpa.s
Bond strength	Initial bonding strength20-21KN/CM2
Peel strength	40-48KN/CM2
package	Plastic bucket or Tin bucket	Plastic pots
Storage	6-9 months
Working temperature	15°C-35°C

Usage:      1,cover the surface should be cleaned to remove oil, dust, and thoroughly dried, the surface can not have any oil, water and other foreign matter, otherwise it will affect the bonding strength.      2, A ingredients in the materials before mixing drums or inverted, according to mixing ratio A material and B material, and fully mix well.      3, the amount of adhesive into the end cap and place a moment, the adhesive coating on the surface of a flat cover all the parts.      4, will filter paper (or increase the central tube) into the cover and check the two bonding surface to ensure its full contact, standing at the top a little pressure. 

     5, after 4 hours of curing, the flip cover and bonding with another 24 hours to dry completely before packing.5 days after use.

  

 

  

 

two parts of auto filter adhesive