Overview
SG1008 8-ports Gigabit Ethernet Switch is a layer 2, wire-speed, Gigabit unmanaged switch with no configuration interface or options.
SG1008 offers 8 10M/100/1000M RJ-45 ports (auto MDI/MDIX).
Features
Port Attribute
l Each port supports auto MDI/MDIX
l Each port supports Auto-Negotiation
l Each port supports 10M full/half duplex, 100M full/half duplex, 1000M full/half duplex
l Each port supports no-block wire-speed switching
Port Flow Control
l Support back pressure flow control in half duplex
l Support IEEE 802.3x flow control in full duplex
MAC Address Table and Security
l Support MAC address auto learning
l Support MAC address aging (aging time 300s)
Specification | Description |
Backplane bandwidth: | 16 Gbps |
Switch mode: | Memory Forwarding Mode |
MAC table size: | 1K |
Packet buffer: | 2Mb |
Dimensions (H × W × D): | 155mm x 109mm x 33mm |
Port: | 8 10/100/1000M RJ-45 ports |
Cabling type: | 10BASE-T/100BASE-TX/1000BASE-T |
Status LEDs: | Link/Act, 1000M |
Other LEDs: | Power |
Operating temperature: | 0°C~45°C |
Operating humidity: | 10%~90%, non-condensing |
Storage temperature: | -10°C~70°C |
Storage humidity: | 10%~90%, non-condensing |
Power: | 4W Max |
Voltage: | AC 100 – 240 V, 50/60Hz |
Standards supported: | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x |