The 8139D Fast Ethernet Adapter is a highlyintegrated and cost-effective Fast Ethernet Adapter that provides 32-bit performance,PCI bus controller, and full compliance with IEEE 802.3 10Base-T, IEEE 802.3u100Base-TX specifications and IEEE 802.3x Full Duplex Flow.
8139D keeps low cost and eliminates usage barriers. It is theeasiest way to upgrade a network from 10 to 100Mbps. Supports both 10Mbps and100Mbps network speed both in Half-Duplex and Full-Duplex transfer modes, using Auto-Negotiation technology to detect the network speed. It also can be widely used in most modern Operating System. For Windows Me/2000/2003/XP integratesthe right driver, 8139D is really a plug-and-play device
ProductFeatures * Supports Full Duplex and Half Duplextransfer modes * Supports IEEE 802.3x flow control forFull Duplex mode * Provides diagnostic software * One LED indicator for monitoringlink/activity * Supports drivers for NetWare 3.x,4.x, Windows 98, Windows Me, Windows NT4.0, Windows 2000, Windows XP, WindowsVista, Linux 2.4.x
Standards and Protocols | IEEE 802.3, 802.3u, 802.3x CSMA/CD, TCP/IP, PCI Revision 2.1/2.2 |
Interface | 32-bit PCI |
Transmission Rate | 10/100Mbps for Half-Duplex mode 20/200Mbps for Full-Duplex mode |
Flow Control | IEEE 802.3x Flow Control (Full-Duplex) |
Port | 10/100Mbps RJ45 |
Network Media | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100¦¸ STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100¦¸ STP (maximum 100m) |
LED Indicator | Link/Act |
Safety & Emission | FCC, CE |
Environment | Operating Temperature: 0~40 (32~104) Storage Temperature: -40~70 (-40~158) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Operating System | NetWare 3.x, 4.x, Windows 98/Me/ NT/2000/XP/Vista, Linux |
Network Card