Ads by Google
Plastic injection moulding temperature controller
1.Feature
Simple operation. 2-row LED
Be compatible with other brands such as YUDO, Athena, DME, PCS, INCOE and so on.
Auto PID control, manual control, standby mode
3 selectable PID Auto- tuning modes (Normal/ Avoid Overshoot/ Connect to supply).
High accuracy temperature control .
2 selectable temperature line (J/K)
2 selectable temperature unit(°C/°F)
2 selectable control output type (triac PWM mode/ triac SSR mode)
Various functions of alarm
Various functions of self-protection and equipments protection
Soft-start mode or full speed start mode
The operational menu is set by grade. Use lock to keep high level parameters safe.
Reset to factory default easily
Internal linear calibration function: to deal with the temperature deviation of control point caused
by wrong sensor location or uneven temperature of heating elements.
2.Specification
Supply Voltage | AC85V~250V,50/60Hz, | Consumed Power | <2.5W |
Temperature Control Type | PID Control/Manual | Control Output Type | triac(PWM mode); triac(SSR mode) |
Temperature Sensor Type | Thermocouple J, K | Temperature Measurement Range | 0°C~500°C(0°F~900°F) |
Temperature Measurement Accuracy | ±0.25%F.S | Temperature Setting Range | 0°C~450°C(0°F~842°F) |
Temperature Control Accuracy | ±0.25%F.S | Output Load Capacity | 20A, 50W~2200W 100W~4400W |
Operating Temperature | 0°C~55°C(0°F~122°F) | ||
Storage Temperature | -20°C~70°C(-4°F~158°F) | Power Switch type | HRTC-B: Rocker Switch |
Operating Humidity | 10~80%RH (no condensation) |
3.Diagnosis Function
(Alarm when the situation below occurred)
Ultra-temperature and ultralow temperature
Thermocouple break,short or inverse
Thermocouple is out of its prosition
Heater break,short or overload
Output SCR damaged