KS-55T plastic injection mould machine 55ton
Injection unit:
double guiding rod supporting
double dro-cylinder balance injection
cold start protection
linear displacement transducer accurately monitor injection position
heating status indicate
Computer-control:
PLC control
automatic alarm
digital memory for mold group
Hydraulic unit:
Japan YUKEN
system pressure is controlled through proportional
Clamping unit:
fine-element analysis used to design platen
adjustable mechanical support system used for moving platens to protect tie bars
Other parts:
shot counter and reset function
malfunction alarm light
self-diagnostic function
emergency stop buttons placed both front and rear of the machine to provide to easy access
Model | Unit | KS-55T |
Screw Diameter | mm | 25 | 28 | 32 |
Injection Pressure | Kg/cm² | 2150 | 1714 | 1313 |
Theoretical Shot Volume | cm³ | 88 | 111 | 145 |
(ps) Max.shot Weight(ps) | G/oz | 80 | 102 | 133 |
Injection Rate | cm³/sec | 65 | 81 | 106 |
Number of Temperature Control | zone | 3 |
Clamping Force | Tons | 55 |
Opening Force | Tons | 14 |
Platen Size | mm | 720*560 |
Distance Between Tie Bare | mm | 500*340 |
Min.Mold Height | mm | 200 |
Oprening Stroke | mm | 200 |
Ejector Force | Tons | 2.2 |
Ejector Stroke | mm | 49 |
Max.Hydaulic Pressure | Kg/cm² | 140 |
Pump Output | Liters/min | 60 |
Pump Motor Power | kw/HP | 11/15 |
Barrel Heating Power | kw | 6 |
Machine Weight | Tons | 2.3 |
Machine Dimensions(L×W×H) | m | 2.1*1.25*2.82 |
Shipping Measurements(L×W×H) | m | 2.3*1.5*2.3 |
KS-55T plastic cap compression molding machine