Ads by Google
Productivity
Fast cycling due to specially designed cooling circuits
Part ejection sensors that monitor preform transfer to the take-off plate,improving cycle time
Standard interchangeable mold components,replacement parts available within 24 hours
Reliability
Rugged design for long life
Auxiliary tapers that reduce mold wear by pre-aligning the mold halves prior to the engagement of the neck ring tapers
Roller cams actuate both the opening and closing actions on the thread splits
Part quality
Lowest cavity-to-cavity weight and dimensional variation as a result of best-in-class manufacturing machines and processes
Water hoses that are manifolded at the bottom of the hot runner preform mould,eliminationg potential for water marks on preforms
PET Preform Mould Main Components Specification and Advantages | ||
Main component | Specification and Advantages | |
Core | 2316 steel from Sweden | high-quality special mould steel from sweden (HRC >45) gurantee 2 million shots without any maintenance |
Neck | S136 steel from Sweden, HRC >60, International standard screw neck | |
Cavity | 2316 steel from Sweden Each cavity have an independent temperature controller Each cavity self-clamp independently, ensure mould concentricity. 0.05-0.06mm | |
Body | P20 Steel material from Germany | |
Hot runner plate |
2344 Steel material from Germany
| |
Slider Plate | wear-resistant copper | |
specially designed cooling circuits | Proper design reduce molding cycle time to 15 seconds( with proper water chiller and injection machine) about 3-5 shots per minute | |
Hot runner design | make sure the high quality of preform products. | |
Heater | Anole Germany | |
valve gated design with Automatic drop | each cavity has its independent heating zone and temperature is measured by independent thermocouple. .(advantages: easily avoid some problems such as white or draw bench on bottom). Valve gated type without tail reduces labor force. | |
Precessed by high presion CNC machine and numerical control loathe machine | Lowest weight and dimensional variation thickness between max. part and min. part is not more than 0.05mm make sure that every parts can match well | |