Injection blow moulding machine IB30
l Machine features:
1).The clamping framework adopts single-crossbeam, double pillars, which enlarges the space of setting mould, will be easier to install mould.
2).Adoption of tie-bar protection makes open / clamping mould work while transfer table rise / fall, so the production efficiency improve obviously.
3).Available variable pump get further power consumption saving in system.
4).Injection clamping adopts the structure of three oil vats and small supply-oil case, hence the speed of open / clamping will be quicker and the bearing pressure of mould will be more equally.
5).Adopt six-pole motor, lower noise, lower energy consumption
6).Special thickness of working platform is made of QT material, excellent mechanics function, difficult to transform.
l Product Features
1).Excellent mechanical strength, impact resisting and non-cracking.
2). Bottle mouth and thread are of precise measurement, enabling100% close match with the bottle cap.
3).The weight of the product can be pre-set..
4).The measurement and thickness of the product can meet the requirement of the design without any deviation.
5).The surface of the bottle mouth and the body is bright and smoothness.
6).No deflashing and trimming, save the material.
7).There is no joint seam at the bottom, and the bottle strength is improved accordingly.
8).The joint seam on the bottle body is smooth.
No. | Item | Data | No. | Item | Date | No. | Item | Data |
1 | Dia. Of Screw | 40mm | 8 | Idle time | 3 S | 15 | Wastage of cooling | 3 m3/h |
2 | Max. theoretical capacity | 165 cm3 | 9 | Max Mould size L *W | 400*250 mm | 16 | Overall size L* W* H | 3150*1150*2200 mm |
3 | Heating power of cylinder | 6.5 kw | 10 | Min. mould thickness | 180 mm | 17 | Machine weight | 4T |
4 | Heating control section | 3 qty | 11 | Main power | 15kw | 18 | Range of formability product | 5-800 ml |
5 | clamping force 0f injection die | 300KN | 12 | Pressure of hydraulic system | 14Mpa | 19 | High of formability product | 200 mm |
6 | Clamping force 0f blow die | 55 KN | 13 | Working Pressure of comp air | 1.0 Mpa | 20 | Dia. of formability product | 100 mm |
7 | Opening distance of mould | 120 mm | 14 | Wastage of comp air | 0.3m3/h | 21 | Total power | 20 kw |
Injection blow moulding machine IB30