Product Introduction
This 500M Wallmount/adapter can provide the transmission of broadband data service via power line,which are suitable for use in a wide range of both residential (in-home) and commercial (offices,apartments, hotels, warehouses) network applications in which existing power lines can be utilized.There is never any need to install new wires. These adapters enable the effortless creation of a high-speed network that supports video, voice and data.
Wallmount type and power voltage range of 85 to 265 VAC 50/60Hz
HomePlug AV compliant, Co-existence with HomePlug 1.0 Nodes
Support QAM 1024 /256 / 64 / 16 / 8, QPSK, BPSK, and ROBO modulation schemes
Up to 200 Mbps data rate on the power line.
128-bit AES Link Encryption with key management for secure power line communications
Windowed OFDM with noise mitigation based on patented line synchronization echniques
improves data integrity in noisy conditions
Dynamic channel adaptation and channel estimation maximizes throughput in harsh channel
conditions
TDMA and priority-based CSMA/CA channel access schemes maximize efficiency and
throughput
Integrated Quality of Service (QoS) Enhancements: contention-free access, our-level priority
based contention access, and multi segment bursting
ToS and CoS Packet Classifiers
Supports IGMP managed multicast sessions
Application
High Definition (HD) and Standard Definition (SD) video distribution
Higher data rate broadband sharing for power line LAN
Shared broadband internet access
TV over IP (IPTV) and Voice over Internet Protocol (VoIP)
Parameter Specification
System SPEC | |
Chipset | AR7420 |
SDRAM | 128bits |
Serial Flash | 16Mbits |
Firmware | Support North America/Europe/APAC/Japan |
Feature and Technology SPEC | |
Protocol | HomePlug AV 1.0 EEE802.3 10/100 Ethernet(100Mbps) EEE802.3u Fast Ethernet Co-exists with existed HomePlug1.0 |
System Support | Windows 98SE, 2000, ME, XP 32/64 bit ,Vista 32/64bit,Windows7 32/64bit |
PLC Rate | 200Mb |
Data Rate- TCP/UDP | 65Mbps TCP 90Mbps UDP |
Modulation Band | 2-30MHz |
Modulation Schemes | Supports256/64/16/8-QAM, QPSK,BPSK and ROBO |
Encryption | 128 AES |
QoS | Support contention-free access, four-level priority based contention access, and multi segment bursting Support VLAN Priority Support ToS and CoS Packet Classifier |
Work Mode | TDMA and priority based CSMA/CA |
Multicast Support | Supports IGMP managed multicast sessions |
IPv6 | Support |
SNMPv2 or v3 | Support |
Typical Coverage | Up to 5000 square foot home The actual Coverage will vary with the power grid and the number Of PLC terminal device. |
LED’s | Power Ethernet: Ethernet Link and Activity Data: PLC Link and Activity |
Push Button | RESET:Restore the default factory parameter NMKSET:Set up network password automatically |
Power Socket | Support British, Euro, Japan, US and China power connector |
Ethernet Interface | 1 x RJ45 for 10/100 Ethernet (Auto MDI/MDI-X) |
Consumption | 4.0W |
Environment Requirement | |
Operating Temperature | 0º to 45º C |
Storage Temperature | -20 º to 70 º C |
Operating Humidity | 10% to 90% Non-condensing |
Storage Humidity | 5% to 90% Non-Condensing |
Input Rating | 100-240 VAC, 50/60Hz |
EMC and Safety | |
Regulatory Compliance | FCC Part 15 Class B CE |
Safety Regulations | UL |
Green Standard | RoHS |
Physical Dimension | |
Physical Characteristics | L×W×H: 90mm*53mm*35mm |
Weight | 140g |
newest Qualcomm pass-through adaptateur CPL Powerline communication adapter PLC ethernet adapter with EuP 2013