Ads by Google
TFT LCD module GDN43M03-GTT035KDH03 includes: AD board: DN-D43AT VER:1.00, 3.5” Digital TFT LCD: GTT035KDH03, Keypad board, Power cable, Video cable and VGA cable DC/ DC Converter, LED Backlight Driver, Video and VGA Decoder All In One NTSC / PAL System automatic identifying and converting Single Operation Voltage +12.0V (Min9.0V, Max15.0V) Support Video & VGA Signal Input OSD controls: Allow on-screen adjustments of Brightness, Contrast, RGB Auto Color Balance, H-Position, V-position Support Touch Screen Function (Option) This product is RoHS compliant
Item | Specifications | Unit |
Model name | GDN43M03-GTT035KDH03/XX-XX | |
Screen size | 3.5(diagonal) | inch |
Display ratio | 4:3 | |
Resolution | 320(RGB)×240 | pixels |
Backlight | LED | |
Brightness | 300 | cd/m2 |
LED life time | 30000(Typ.) | hr |
View angle | 40/60/60/60 (U/D/L/R) | ° |
Input/output interface | Video | |
D-Sub 15 pin female for VGA | ||
Display dimension | 76.9( W)×63.9( H)×3.15(D) | mm |
Active area | 70.08(W)×52.56(H) | mm |
A/D board dimension | 80.0(W)×67.0(H)×9.2(D) | mm |
Operation voltage | DC12.0(Typ.) (Min.9.0, Max.15.0) | V |
Input current | DC 120±20 | mA |
Power consumption | 1.44 | W |
Start time | 1.5 | s |
Operation temperature | 0 to 60 | °C |
Storage temperature | -20 to 70 | °C |
Setting the TFT LCD module.
Key operation, the keypad includes <Source>, < ON/OFF>, < Menu>, < Down>, <Up>
< Source>:switch the input signal between Video and VGA.
< ON/OFF>: turn the backlight ON or OFF. But this is not shutting off thepower supply from AC/DC adapter, this only let the module into standby (power saving) status.
<Menu>: pop the OSD menu on no menu status, or exit present menu level to its fathermenu level. The <Menu> key is confirm key also, it confirms your operation.
<Down>:move the cursor (highlight bar) from “Down” to “up” on the OSD menu, or reduce the parameters value from “large” to “small”. These parameters are such as Brightness, Contrast, Volume, etc.. Inaddition, it is a shortcut key to decrease the volume value at no menu status.
<Up>: move the cursor(highlight bar) from “up” to “Down” on the OSD menu, or increase theparameters value from “small” to “large”. These parameters are such as Brightness, Contrast, Volume, etc.
QVGA 320 x 240 -- 60 Hz
VGA 640 x 480 -- 60 Hz
Recommend customer to use QVGA (320x240) resolution.
Industrial Controller Medical EquipmentSecurity EquipmentSimple Function Equipment oHS compliant