Automatic AB glue mixed dispensing machine adopts (Germany) the gear pump precision measurement methods, suitable for high viscosity two-component liquid coating, potting and forming. 

1. Gear pumps with high precision

2. Stepper motor drive gear pump

3. Control system use PLC to control

4. To set the speed of stepping motor through the touch screen, precise control the flow and the proportion with digital display.

5. Dynamic mixing evenly and completely solved the Static mixing inequality due to the big difference between viscosity and ratio of AB group.

6. Time control mode of both manual and automatic

7. Plastic valve integrated use of piston and diaphragm. Back suction function of spit glue and excellent glue off function are available.

8. AB glue barrel are made up of 303 Stainless steel.

9. AB glue will be injected into the products after they are mixing well in a static mixing tube

10. The manipulator dispensing automatically by controlled by the system.

11. Working process: Put the car carried glue dispenser in front of three-axis glue dispenser, make the right position and then set up these three dispensing valve 3-axis glue dispenser. Alignment Z-axis dispensing position

12. Use car carried installation, easy to move

13. All the mixing proportion that under 8:1 are available.

14. Maintain a good environment

15. Low cost, save glue.

16. The structure of AB glue valve: A glue and B glue are having their own independent glue valve and when they come out of their valve they will start mixing in the mixing tube so they will meet only inside of mixing tube and A glue will not go into B glue valve.

17. Cleaning: Because A glue and B glue are only mixing in mixing tube so there is no need to clean AB glue valve you just need to clean the mixing tube.

18. Models can be customized according to customer specific requirements of different flow, different control methods, and different installation methods.

Specification: 

  Illustrate of Automatic AB glue mixed dispensing machine