Wet drum permanent magnetic separator Magnetic intensity: 145~170 mT Capacity: 15~30 tons/hour, 48 CBM/hour Power: 2.2 kw

Introduction:

Series CTS downstream wet drum permanent magnetic separator is usually used for sorting the fine-grained strong magnetic minerals, or removing strong magnetic minerals from non-magnetic minerals. Its composite magnetic system consists of high performance rare earth permanent magnet (main magnetic source) and ferrite permanent magnet. With a deep magnetic field, the machine can make a continuous row of ore feeding and discharge. It also has enough working clearance and high processing capabilities.

Working principle:

When the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.

The drum can be equipped with three kinds of tanks. That is downstream tank (Series CTS), upstream tank (Series CTN) and half upstream tank (Series CTB).

The downstream tank (Series CTS) is applicable to rougher flotation and concentration of ore with size: 0~10mm.

The upstream tank (Series CTN) is applicable to rougher flotation and concentration of ore with size: 0~0.6mm and the recovery of heavy-medium in coal preparation industry. 

The half upstream tank (Series CTB) is applicable to rougher flotation and concentration of ore with size: 0~1mm.

 

Sketch map: 

Technical parameters:

Model No.	Dimensions of drum (mm)		Magnetic intensity   (mT)	Capacity		Motor power   (kw)	Rotary  speed   (r/min)	Weight (kg)
	Diameter	Length
				t/h	m³/h
CTS(N.B)-618	600	1800	145~170	15~30	48	2.2	40	1330

Note: 1 mT = 10 gauss

Welcome to contact us for more technical parameters of different model numbers.

Series CTS downstream wet drum permanent magnetic separator