welding machine MMA 150T 1)Inverter AC/DC MMA/TIG welder 2)Controlled by micro-processor

 

MMA 150T,180T,200T

welding machine MMA 150T1)Inverter AC/DC MMA/TIG welder2)Controlled by micro-processor

TECHNICAL DATA		MMA			MMA
		150T	180T	200T	150TP PFC	180TP PFC	200TP PFC
Single phase input 50/60 Hz	V	230	230	230	230	230	230
Installed power	kVA	3,7	4,6	5,6	3,7	4,6	5,6
Fuse (delayed action)	A	16	20	22	16	16	16
Power factor max	V	0.8	0.8	0.8	0.95	0.95	0.95
Open circuit voltage	V	88	88	88	88	88	88
Current range	A	5-150	5-180	5-200	5-150	5-180	5-200
Duty cycle at (40°C) X%	A	150 (35%)	180 (35%)	200 (20%)	150 (35%)	180 (35%)	200 (20%)
Dimensions	cm	32×12×22	32×12×22	32×12×22	32×12×22	32×12×22	32×12×22
Weight	kg	4,0	4,2	5	4,2	5,2	7

MMA 150T,180T,200T

MMA 150T,180T,200T represent the latest evloution in inverter technology DC welding equipment. these powerful 100 KHz power sources are based on latest generation IGBT’s and fitted with a flat transformer. JLT MMA 150T,180T,200T, with their lightness, reduced size and their MMA and TIG welding with "lift" mode arc striking are the most suitable solution for maintenance and light fabrication works.

FEATURES 1.Excellent welding characteristics with any type of electrode 2. Suitable to be used with 100m length cable without power loss 3. All the data are referred to 40°C environment temperature as imposed by the standards 4. Low energy consumption and high electrical efficiency 5. Possibility to work with power generator sets of adequate size thanks to over-under voltage protection against fluctuations 6. Three available welding processes

 

arc welding equipment (MMA 150A)