Ads by Google
Product description
The water dermabrasion handpiece is formed with a water outlet joint and a water inlet joint, which is connected to
a water outputing end of the two-way flow control valve, while the water outlet joint is connected to the negative pressure air compressor. One water inputting ends of the two way flow control valve are connected to a pure water bottle. When the two-way flow control valve is switched to a dermabrasion position or a skincare position, the negative-pressure air compressor can be started to generate a vacuum suction, which will suck pure water from the pure water bottle to flow into the water dermabrasion for executing a dermabrasion operation or a skincare operation.
I.Through negative pressure, the water dermabrasion machine can replace the impurities in the pores with clean water , thus gaining the effect of cleaning the pores and improving the moisture condition of the skin.
II.BIO and PDT are used to rejuvenate the skin.
III.Bipolar-RF is used to tighten the skin.
Effect
3 Handpieces | Effect |
1.Water dermabrasion | remove the dead skin |
deeply clean the face | |
remove the comedo | |
improve the moisture condition of the skin | |
2.Bipolar RF | skin tightening |
3.BIO+PDT | improve oily skin |
anti-allergic | |
improve blood circulation |
Parameters
| Water Dermabrasion hand piece | |
| Head | thin, middle. thick, can be choosed |
| Vacuum press | 50-95K Pa |
| Hand size | 190mm |
| Skin care container | 750ml |
| BIO+PDT hand piece | |
| BIO | 20mA-50mA |
| PDT | Power:3W. Colour: red, blue, green. Point to point |
| Hand size | 300mm |
| Bipolar RF hand piece | 3-6M |
| Hand size | 500mm |
| Whole machine | |
| Size | 40*48*58cm |
| Power supply | 110/220V+10%60/50Hz |
| Weight | 15KG |
power peel microdermabrasion machin