Automatical wire decoiling machine 1) Loading weight: 200kg 2) Max. wire feed speed: 120m/min 3) Diameter of table : 850mm

Automatical Wire Feeding machine (Wire Decoiler)

XD Series Automatical wire decoilers are specially designed to match the CNC Spring Coiler; however, it's also suitable for other spring coiler. It can adjust the feeding speed automatically during working to make the feeding speed of the feeding rack the same as the same as the speed of the spring coiler. It will give an alarming signal and stop automatically whenever there is wire block on the feeding tray. This machine is easy to operate and convenient to use.

Specification 

Model	XD-200
loading weight	200kg
max.wire feed speed	200m/min
diameter of the feeding tray	1100mm
machine power	1.1kw
weight	150kg
power	three phase 220V.AC.50Hz

Wire feeding system

To maintain the cleanliness of feeding servo motor to prevent oil and gas, and dust fall into the servo motor or encoder, resulting in mechanical damage.At least every six months for maintenance or in accordance with the number of machine production, and replace the line feed operation at the same time.Implementation of machine maintenance jobs, follow these steps:

1. Make sure the power is turned off.2. Wipe the parts with cotton cloth, wire feed wheel, sending Line Block, delivers the spindle and other metal surfaces, removal of the mechanical surface debris, oil, grease, dust, and coated with a of antirust thin oil to prevent mechanical corrosion.With the cotton swab to remove the old grease and oil stains on the wire feed drive gear.

3. The transmission tooth gear train gear contact face spreads the gear special-purpose oil lubrication.(Uses OMEGA73 or same level lubricating oil) Attention: Please do not use the air spray gun to be clean, in order to avoid the detritus, the dust fall the slide rails sliding way or in the rotation structure gap