Ads by Google
H-45K, H-60K hydraulic ironworker
This machine just has one cylinder and it has also four working stations: punching; sectional bar cutting; steel plate shearing and notching. One of the features is that the blade holder goes down vertically not swings down. So the distortion of sectional steel cutting doesn’t happen.
The main technical specifications:
model | H-45K | H-60K |
Working pressure(Ton) | 45 | 60 |
Max. cutting thickness (mm) | 10 | 15 |
Plate strength(N/mm2) | ≤450 | ≤450 |
Shearing size of one stroke(mm) | 300×10 | 350×12 |
Ram stroke(mm) | 30 | 40 |
Cycles/min (15mm stroke) | 37 | 34 |
Throat depth (mm) | 165 | 200 |
Punching capacity | 20×15 | 22×20 |
Max. diameter×thickness | 40×8 | 40×11 |
Max. round bar cutting | 30 | 40 |
Max. square bar cutting | 25×25 | 38×38 |
Max. channel steel cutting | 80× 43 | 100× 48 |
Equal angle steel cutting at 90° | 75× 6 | 100× 8 |
Power of main motor(k w) | 4 | 5.5 |
Overall dimension(L*W*H) mm | 1060 * 760 * 1490 | 1180* 760* 1630 |
Weight of machine (kg) | 850 | 1180 |
hydraul ironworker