Ads by Google
Description:
The heater is mainly used for extrusion and casting moulding machines. It has a wide application in various machinery industries. The operation temperature can reach up to 650°C (bronze). In order to concentrate the heat to one direction on the injection face, the other sides of the product are covered by heat retention and heat insulation materials. So it has advantages such as advanced technology, high heat retention, long lifetime, etc. It is widely used in plastic extrusion, chemical fibre, blowing moulding machines.
Table:
Model | Dimension(mm) | Voltage(V) | Power(W) | Key Technical Indexes |
LK-ZT-Φ360Χ180 | Φ360Χ180 | 230 | 10000 |
1.Use condition: environment temperature -20~+60°C, Relative temperature <80% 2.Leakage current: <0.5MA 3.Insulation resistance: ≥8MΩ 4.Ground resistance: <0.1Ω 5.Voltage resistance: no electric breakdown for 1 minute under 1500V 6.Temperature endurance: 500-900°C 7.Power deviation: +8%-8%
|
LK-ZT-Φ180Χ70 | Φ180Χ70 | 250 | 2000 | |
LK-ZT-Φ250Χ100 | Φ250Χ100 | 380 | 4000 | |
LK-ZT-Φ130Χ60 | Φ130Χ60 | 220 | 1500 | |
LK-ZT- L400Χ270 | L400Χ270 | 250 | 6000 | |
LK-ZT- L310Χ276 | L310Χ276 | 230 | 4200 | |
LK-ZT- L150Χ100 | L150Χ100 | 240 | 1000 | |
LK-ZT- L190Χ145 | L190Χ145 | 480 | 1500 | |
LK-ZT- L198XW140XH214 | L198XW140XH214 | 250 | 7000 | |
LK-ZT- L150XW110XH180 | L150XW110XH180 | 250 | 4000 | |
LK-ZT- L100XW52XH100 | L100XW52XH100 | 230 | 1000 | |
LK-ZT-Φ360Χ180 | Φ360Χ180 | 230 | 10000 | |
Note: Other models are available according to your specifications. Please refer to the Order Guide | ||||
Order Guide
Please specify the following when ordering:
The inner diameter (mm) and length (mm) of heaters Thickness of heatersVoltage and power densityGap of two pieces if applicableWiring type and positionWhether need air blowersOrder quantityDelivery date* It’s better to provide us with the drawings/pictures
Cast in brass/bronze heater