SE-600A High-Speed CNC Engraving Machine
1. Machine specification
Specification (mm) | SE-600A | SE-600B |
Table size | 500×700 | 500×600 |
X travel | 500 | 500 |
Y travel | 600 | 600 |
Z travel | 320 | 300 |
Spindle Power | 5 kW | 5 kW |
Spindle Tapper | ER20 | ER20 |
Spindle Speed | 18000 rpm | 18000 rpm |
Bridge width | 550 | 560 |
Spindle nose to table surface | 140-460 | 90-390 |
T-solt(N0-size/distance) | 3-12/175 | 5-14/100 |
X Ballscrew spec. | 32/08 | 32/05 |
Y Ballscrew spec. | 32/08 | 32/05 |
Z Ballscrew spec. | 32/08 | 32/05 |
X Linear slideway spec. | HGH30HA | HGH30HA |
Y Linear slideway spec. | HGH30HA | HGH30HA |
Z Linear slideway spec. | HGH30HA | HGH30HA |
X/Y/Z motor connection | Direct | Direct |
Moving Speed (X/Y) | 15 m/min | 15 m/min |
Moving Speed (Z) | 15 m/min | 15 m/min |
Max load on worktable (kg) | 500Kg | 500Kg |
Weight (Net/Gross) | 3.6/4.0 Ton | 3.3/3.7/t |
2. Accessories :
Machine Bed | Resin Mould High-class casting | |
Ball screw | Taiwanese brandDouble nut pre-tensile | |
Bearings for ball screw | NSK | |
Coupling | Germany brand | |
Spindle | High precision electrical spindle | ER20 24000rpm |
Coolant | Oil cooling | |
Central lubrication system | Taiwanese brand | |
Coolant system | Large flow liquid and air coolant system | |
Guide way protection | Protection cover for X and Y axis | |
Guarding | Full closed | |
CNC controller | SYNTEC 940 or GSK 218M | |
Pulse generator (Handwheel) | Taiwanese brand | |
Travel limit switch | Taiwanese brand | |
Communication interface | RS232 (USB for GSK218M) |
For more details and other optional accessories , please contact us !
Introduction of Frame: Casting with ball screw and guideway (without any controller, motors and drives)
Introduction of Frame: Casting with ball screw and guideway (without any controller, motors and drives)
Introduction of Frame: Casting with ball screw and guideway (without any controller, motors and drives)
Introduction of Frame: Casting with ball screw and guideway (without any controller, motors and drives)
Introduction of Frame: Casting with ball screw and guideway (without any controller, motors and drives)
Introduction of Frame: Casting with ball screw and guideway (without any controller, motors and drives)
Engraving Machine SE-600A frame and complete machine