Ads by Google
CAH(21)-400D
1. Double/Single head decoiler
Coil ID 500mm
Coil OD 1200mm (Max.)
Coil weight 1.5 T (Max.)
Decoiler speed Adjust with feeder
Decoiler use synchronization stepless speed regulation with feeding, motor rotation.
2. Guide material buffer device
Use non-pit guide material buffer way, range measuring system, position switches etc.
3. Feeder machine
Make up of Up and down feeding roller and length measurement roller etc, feeder roller drive system adopt drive motion control system. Feed roller adopts polyurethane, normal use 0-180 m/min, highest feeding speed of 240M/min.
4. V punch part
Mainly includes V punch 1 set, servo motor driver.
V notch has horizontal step function, according to the program to automatic adjust.
Punch range: material center of ± 50 mm, stepping series can up to seven levels.
V shear use servo motor drive, high efficiency, low noise.
Knife life: Each grinding can use at less 1 million times
5. Shearing part
Mainly make up of + 45 °shearing machines, -45 °, shearing machine, horizontal sliding table, discharging roller etc.
Shear use servo motor drive, high efficiency, low noise.
Knife life Each grinding can use at less 1 million times
6. Discharging platform
Unilateral positioning, transmission belt stepless speed regulation, discharging smoothly.
Discharging motor use Germany ABB motor, Toshiba inverter control.
7. Layered machine
Can complete the upper and lower discharging, mainly make by discharging device, transmission magnetic belt etc.
8. The automatic positioning on unilateral width device
Whole line use unilateral positioning, operation mode adapted to different width transfer. The wide organization adopt linear guide orientation, the ball screw transmission ways
9. Pneumatic system
All pneumatic system use Taiwan AIRTAC pneumatic control system, the structure is compact, pipe is convenient to connect, bus connection.
10. Electric control system
The electric control system includes main electric control cabinet and work station.
Main technical parameters
1. Rang of work
Thickness 0.23 - 0.35mm
Width 80 - 320mm
Length 500 to 2000mm
2. Require for coil
Width tolerance ±0.1mm
Burr ≤0.03mm
S deviation Between 2000mm ≤0.2mm
3. Precision
Length tolerance ±0.2mm
Angle tolerance ±0.025°
Burr ≤0.02mm
4. Feeding speed 150m/min
1) Knife life More than one million (Each grinding) Hard alloy mate
2) Total installed capacity About 25Kw
3) Total gas consumption 1 M3/min
5. Working conditions
(1) Temperature less than 40°C
(2) Voltage fluctuation 380V±10%
(3) Frequency 50Hz
6. Has longitudinal step function
7. Operation table direction Right to Left, face to the equipment.
Key components schedule
No. | Name | Qty | Factory or nationality |
1 | Ac servo drive system | 1 | Siemens |
2 | Servo motor | 1 | Siemens |
4 | Special motion control module | 8 | Siemens |
5 | Programmable controller | 12 | Siemens |
6 | Control transformer | 1 | Siemens |
7 | Encoder | 7 | Siemens |
8 | Miniature cylinder | 12 | Japan |
9 | position indicator | 2 | Germany SIKO |
10 | Main low voltage electric appliance | 1 | SCHNEIDER |
11 | Whole machine manufacture and installation | 1 | CANWIN |
Silicon steel cut to length line