Stucco Netting

1'',20GA woven wire netting Easily install to reduce labor cost Minimal waste, optimizes material cost

Stucco Netting

Self-furred zinc coated galvanized steel woven stucco netting is designed for use as reinforcement for cement wall systems. Our 1" (25.4mm) hexagonal mesh is formed with a reverse twist of 20 gauge (0.89mm) galvanized steel wire. 1" 20 stucco netting is furred at 3 inches (76mm) and 6 inches (152mm) on center horizontally and vertically, respectively.

Hexagonal woven wire netting is specially for exterior wall coatings, can be supplied with paperback or not.

Paperback Netting for Stucco:

1 1/2" x 17 gauge, zinc coated, galvanized woven wire Paperback Stucco Netting is made for building as reinforcement wire materials for cement, gypsum plaster, masonry veneer and ceramic tile. 1 1/2" (38mm) x 17 gauge, 1/4" self-furring woven wire in rolls, hexagonal mesh is formed with a twist of 17 gauge (1.38mm) galvanized steel wire. Paperback Stucco Netting is furred at 6" (152mm) vertically.

Architectural stucco netting and reinforcing wire building product are available in various sizes and materials.

Varieties:

Non-furr Stucco Netting

Paperback Netting, Galvanized Woven in Rolls

Paperback Stucco Netting

Woven 17 gauge /Building Paper Backing

Self-furred Stucco Netting

Stucco Netting 17G, Galvanized Woven

Stucco Netting 20G, Glvanized Woven