The Rebar Coupler is used for Rebar Mechanical Splicing in construction with high strength.It is effective and cost saving.

Rebar Coupler

Basic Information

1.Size: 14mm-40mm.

2.Raw Material:45# high-quality carbon structural steel.

3.Three Types: Standard Type, Left-Handed&Right-Handed Type, Reducing Type.

4.Tensile strength could reach 110% of parent material.

5.Suitable Rebar: HRB335,HRB400,HRB500 and Equivalent Rebars.

 

Relate Test:

1.Tensile Strength=1.1*Tensile Strength of Rebar (Usually more than 600Mpa)

2.Fatigue Test: After 2 million times of fatigue strength test, connection is in good condition

We have done official tensile test in Korea, Russia, Saudi Arabia, Vietnam,etc.

 

Technical Parameters

Size	D14	D16	D18	D20	D22	D25	D28	D32	D36	D40
OD(±0.5mm)	22	25	28	30	34	38	42	48	55	59
Length(+2mm)	38	43	48	53	58	63	68	80	83	88
Thread Pitch	2.5	2.5	2.5	2.5	2.5	3.0	3.0	3.0	3.5	3.5
Thread Angle	75°	75°	75°	75°	75°	75°	75°	75°	75°	75°
G/W(KGS)	0.068	0.099	0.125	0.180	0.205	0.317	0.399	0.640	0.900	1.099

 

Product Advantages:

The raw material is 45# high-quality carbon structural steel.Strict quality control.  self-inspection, exchange inspection, sample inspection , 100% inspection etc. reject rate lower than 0.6%.Tensile strength could reach 800 to 900Mpa. Normal steel,for example, HRB335,the tensile strength reaches 500.5Mpa is OK.Our rebar couplers are suitable for steels of different countries.We could pack the goods according to customer's special request.Simple to operate.

Customer's special demands are available.

OEM Service &Design Service & Buyer Label are also offered.