Ads by Google
Model No. | SA213 |
| Rate | 1.0~1200ml/h (0.1ml/h step 1.0~99.9ml/h;1ml/h step 100~1200ml/h) |
| Bolus/Purge rate | 1000~1200ml/h(default value is 1000ml/h) |
| Infusion Volume | 1-9999ml |
| Display Volume | 1-9999ml |
| IV sets compatibility | Comply with all brands after calibration |
| Accuracy | ±5% |
| Bubble sensitivity | Detestability of air bubble ≥40uL |
| Occlusion alarm pressure | 100KPa±20KPa |
| Alarming | Air in line, Occlusion, Door Open, VTBI completion, Low battery, Motor malfunction,Drop abnormal, Low temperature,Pause overtime ,Electrical circuit jam,Error set of accuracy,Air detect circuit error,Motor control error,Battery exhausted |
| Drop sensor | Selectable |
| KVO rate | KVO rate as at 1ml/h with flow rate no higher than 10ml/h; as at 3 ml/h with flow rate higher than10ml/h |
| Internal battery | Fully charged 6 hours, the internal DC12V Ni-MH battery can continuously run over 4 hours at average rate level. |
| Power | 100-240VAC 50/60Hz |
| Power consumption | 18VA |
| Working environment | Operating Temperature: 5°C~40°C |
| Atmospheric pressure: 700 hPa~1060hPa | |
| Relative Humidity: 20%~90% | |
| Classification | Type BF, Class I continuous volumetric infusion pump with internal battery; IPXI (sealed drip-proof device) |
| Dimention (L X W X H) | 165mm(length)×120mm(width)×210mm(height) |
| Gross weight | 3.5kg |
| Accessories | 1pc User’s Manual, 1pc power cable |
| Warranty | 18 months |
| Standards | EN60601-1,EN60602-24, CE0123,SFDA,FSC |
SA213 Infusion Pump with CE and FSC