marine rubber fender for ship launching installed in the teminal and dock used the ship shore annd landin

marine rubber fender for ship launching

Specifications performance and weight of pneumatic rubber fender

Specification D×Lm	Initial pneumatic pressure 0.05Mpa			Initial pneumatic pressure 0.08Mpa
	Sphere Weight(KG)	R(KN)	GEA(KJ)	Sphere Weight(KG)	R(KN)	GEA(KJ)
0.5×1.0	25	64	6	25	85	8
0.6×1.0	32	74	8	32	98	11
0.7×1.5	50	137	17	50	180	24
1.0×1.5	80	182	32	80	239	45
1.0×2.0	100	257	45	125	338	63
1.2×2.0	120	297	63	165	390	88
1.35×2.5	165	427	102	226	561	142
1.5×3.0	315	579	153	370	761	214
1.7×3.0	405	639	191	436	840	287
2.0×3.5	590	875	308	632	1150	430
2.5×4.0	1050	1381	663	1110	1815	925
2.5×5.5	1333	2019	943	1410	2653	1317
3.0×5.0	1880	2000	1050	2155	2709	1571
3.0×6.0	2160	2488	1312	2470	3292	1888
3.3×4.5	2020	1884	1175	2300	2476	1640
3.3×6.0	2300	2783	1675	2600	3652	2338
3.3×6.5	2700	3015	1814	3080	3961	2532
3.3×10.6	4403	5257	3067	5020	6907	4281
4.5×9.0	6554	5747	4752	7470	7551	6633
4.5×12.0	8739	7984	6473	9960	10490	9037
Note: The weight is the fender weight (excluding protective sleeve), with weight error of±10% and counterforce error pf±10%

 

Specifications of others can be customized according to customer required

Notes about applying boat rubber fender;

1, frequently check whether the airbag spheroid is damaged and whether the pressure is normal, and the valve core must be replaced every six months 

2, the steel wire should wrap the rubber pipe, when tying steel wire to boat rubber fender in case the boat rubber fender is stabbed 

3, The surface or subject next to the boat rubber fender cant's be hard and sharp-pointed in case the boat rubber fender is stabbed

4, The accessories and jig's nuts can't be loose when testing the internal pressure

5, When applying the boat rubber fender ,the rope net should be reliable, the steel wire used for hanging metal and the hook link can' t be piled up and heavy items can't be piled on the boat rubber fender

 

 

marine rubber fender for ship launching