1.Forging manipulator 2.Rail type 3.ISO9001:2000 certificate 4.Optimize forging operation 5.Enhance survival rate

Forging manipulator producted by Shengyang can be divided into the following types:

Upper four link rod type, lower four link rod type and frame type according to the structure mode; rectilinear type, rotating type, translation type according to the motion mode; full mechanical type, full hydraulic type, mechanical & hydraulic mixed type according to the drive mode, all of them can meet the demands of different customers.

This equipment can finish the following movements: large frame moving freely on the track; rising, falling and inclination for the nippling lever; clamping, loosening and rotation for the clamp head. Large frame driven by motor adopts integrated frame structure; clamp frame can realize steady rising and falling driven by cylinder; jaws clamping can be realized through pull rod driven by cylinder, front and back end and the two sides of clamp frame are equipped with cushioning device.

Main parameters of 10T Forging Manipulator

No.	Item	CZJ-10	Unit
1	Nominal capacity	10	T
2	Max torque	25	T.m
3	Ingot size	270-1000	mm
4	Tong center distance	900-2100	mm
5	Tong forward distance	2000	mm
6	Clamp turning diameter	1500	mm
7	Clamp turning speed	22	rpm
8	Carriage speed	25	m/min
9	Front lifting speed	5.5	m/min
10	Rear lifting speed	6.5	m/min
11	Rail clearance	3000	mm
12	Working pressure	12	Mpa
13	Total power	115	Kw
14	Weight	55	T
15	Boundary dimension	8.5×3.6×5.4	L×W×H(m)

10T Forging Mechnical-hydraulic Manipulator