raised face Lap joint Flange 1.Size: 1/2"-24'' 2.Material:carbon steel, stainless steel 3.Standard: ANSI B16.5,BS4504,JIS,DIN raised face Lap joint FlangeSpecifications

1) Forging Stainless Steel Flange 2) ANSI B16.5/B16.47 Flange, DIN Standard Flange, EN1092-1 Flange 3) EN10204 3.1 Certificate

1.Materials, Grades (stainless steel) Available:

EN10222-5/DIN17440: 1.4301, 1.4306/1.4307, 1.4401, 1.4404 and 1.4541, 1.4571 etc.

ASTM SA/A182 F304, F304L, F316, F316L, F316Ti, F321 etc.

SUS F304, SUS F304L, SUS F316, SUS F316L, SUS F321 etc

2.Mainly Flange Standards Available:

1) ANSI B16.5 150LBS (300LBS, 600LBS, 900LBS,1500LBS, 2500LBS) Blind/ Slip-on/SCH 10(S),SCH 40(S), STD,SCH 80(S) Welding Neck/ Plate/ Socket weld/ Threaded/ Lap Joint Flange

ANSI B16.47 Series A/B Blind/Weld Neck Flanges

2) DIN 2527 (PN6, PN10, PN16 PN25, PN40, PN64, PN100) Blank Flange, DIN 2573 PN 6 and DIN 2576 PN10 Slip on Welding Flanges, DIN 2631 PN6, DIN 2632 PN10, DIN 2633 PN16, DIN 2634 PN25, DIN 2635 PN40, DIN 2636 PN64, DIN 2637 PN100 and DIN 2638 PN160 Weld Neck Flanges, DIN 2641 PN6 and DIN 2642 PN10 Lapped Flanges

3) EN 1092-1 Flanges (PN2.5bar- PN400bar).

4) BS 10 Table D/E/F/H Flanges, BS 4504 Flanges, SABS 1123 Flanges

5) JIS 5K, 10K, 16K, 20K, 30K (PL, SO, BL, TH, SW), JIS 30K Weld Neck Flanges

6) AS2129 Table D/E/F/H Flanges

7) GOST 12820-80/GOST 12821-80 Flanges

3.Sealing Surface: FF, RF, LJ, TG, MF, M and R.T.J. (RJ).

other products:

If you have any question,pls don't hesitate to contact us.

Best Regards

Mindy He

raised face Lap joint Flange