Ads by Google
Output Per Minute | 16-19 pieces of toothbrushes with 40 holes |
Performance of tuft hole per minute | 750-850 holes |
Tufting Angle | 60° |
Specifications of tufting | 1.5-2.5mm |
Number of axis | 4 |
Motor specifications | 0.37kw for the principal axis with four servo motors of 0.4kw each |
Specifications/colors of tufting | 2 colors or 3 colors |
Size of hole diameter | 1.2-2.5mm |
Hole diameter(bristle) | 0.11-o.4mm |
Hole diameter(anchor or/and wire) | Width:1.4mm Thickness: 0.28-0.29mm |
Number of trimming devices | 2 trimmer knives |
Specifications of trimming | Length of knife-edge: 50mm |
Number of endrounding devices | 4 |
CNC specifications | DELTA (DVP-10PM) |
Compressed Air(Bar) | 0.6-0.7 |
Tufting&Trimming&Rounding Combined Machine
Feature: 1)The speed can reach above 750-800 r/min
2)The cam is made by the imported CNC cam grinding machine and the data is accuracy which can make the noise more lower.
3)Transmission bearings are made by the well-known manufacturers.
4)The numerical control system is researched independent
Tufting&Trimming&Rounding Combined Machine