Ads by Google
Dry mortar mixing plant equipment :
This line is composed of bucket elevator, mixer, finished product warehouse,
simple packing auger, dust remover, electrical cabinet, air compressor and gas phase balance,
mostly suitale for the new investors into mortar industries. The materials are measured manually through
bucket elevator to the mixer. The materials are mixed into finished warehouse, then through packing auger to
measure and pack manually. Low investment
Yield: 10-15 tons per hour
Operators: 3-5
Machine equipment: 5-10m
Covering area: about 50 square meter
Dry mortar production line is used for producing dry mortar which productivity is 5-100t/h.
Applications of 10ton/h Dry mixed mortar equipment
Dry mortar production line is used for producing dry mortar, it main consists of the following parts: material store silo, sand dryer, spiral conveyor, weighing system, hoisting machine, pre-mixing silo, mixing, end product silo, packing machine, dust collector, air-phase balance system, control system. The productivity is 5-100T/h. According to the layout type, it can be classified into tower type, self tower type and series type. Its up to the customers workshop area.
Raw Materials of 10ton/h Dry mixed mortar equipment
1.Binders: Cement, hydrated lime, anhydrite, gypsum. 2. Filler: Silica sand, quartz sand, limestone, dolomite, expanded perlite etc. 3. Mineral admixture: Ground granulated blast furnace slag, fly ash, pozzolana, fine silica powder etc. 4. Water-retention and thickening material. 5. Chemical additives: Cellulose esters, superplasticizer, air entraining agents, accelerating agents, retarding agents, defoaming agents, hydrophobic agents, and etc
Manufacture various mortars of 10ton/h Dry mixed mortar equipment
Raw Material Storage Silos :
Sand Drying Unit :
Bucket Elevator:
screw conveyor :
Weighing System:
Mixer :
End Product Silo:
Bagging System:
Dedusting System :
Computer Control System :
Air Compressor / Air-phase Balance System
Steel Structure /
End Products Storage Silos waiting for Delievery
Pls. contact us for the detailed question table, so can we get your requirements and design the whole plant according to your need.
Technical Parameters of Dry mixed mortar equipment
Mode | Capacity | Area | Height | Note |
Simple | 1-5t/h | 40m2 | 5-10m | Manual batching and packing |
Basic | 5-15t/h | 40-60m2 | 6-10m | Manual batching ,automatic packing |
Semi-automatic Serial | 5-15t/h | 40-80m2 | 8-12m | Automatic batching of coarse material,manual batching of additive ,automatic packing |
Semi-automatic Tower | 5-50t/h | 40-100m2 | 10-25m | Automatic batching of coarse material,manual batching of additive,automatic packing |
Price : FOB QingDao Port
Packing : Plywood Cese Box, nude packing or according to client’s requirement
Payment : 100% T/T
Delievery : within 60Days
Supply capacity: 3sets/Month
Min order: 1Set
Simple-type dry-mixed mortar Plant