Welcome to ECOL - Join Free - Sign In
One-time use 5 Gallon plastic bottle cap
One-time use 5 Gallon plastic bottle cap
Supplier Info
[China Supplier]
Contact Person : Mr. Wu Kevin
Tel : 0086-755-23140799
Fax : 0086-755-28180796
Product Detail
5gallon cap 1.New plastic material 2.Dustproof, Non-spill and Security 3.One-stick label 4.Easy to tear on the bottle

One-time use 5 Gallon plastic bottle cap 

  plastic bottle cap , plastic water bottle caps , 5 gallon water bottle caps 

· New food-rate plastic material. · Dustproof, Non-spill and Security. · One-stick label,available with or without foam liner 

· Easy to tear on the bottle. · The inner cap opens smoothly and securely when the bottle removed from the cooler, which particles from entering bottle.· Pass the FDA. · Embossing & printing custom logo based on volume. · 192,000pcs/1x20'container,460,000pcs/ 1x40'High cube container.

   The degree of tightness between 5 Gallon cap and inner cap is coordinate mooderately,when normal using,the inner cap can easily push out and the cap can easily unrip by hand after used.

 Appearance conforms with these requirments:

item

standard

product surface

product should be full,competely structure, surface and inside is smooth, without apparent shrinkage, bubble, flash and defect

color

color equably

pollution

no dust, no plastic scrap or other impurities, no obvious odor

trademark

logo mod e& number are full, legible

  

Singel stick labels quality  subjects to the follwing requirements:

item

reqirement

printing

single stick label should have right pattern,colors and fonts, good printing quality no obvious show besmirch,no noise and no defects.

Seal cutting

After cutting ,the single stick labels edge is smooth, no flash and silk glue. After cutting, geometry center is on the center and the deviation error less than 2mm.The label on the center of  5 Gallon caps. The deviation between label and caps center diameter   error is not more than 2mm

Heat sealing

heat sealing evenly, level off, without apparent ruffle, become warped edge, Stick label and 5 Gallon caps heat sealing are strength.when taking off label,the label area remains on the cap no more than 50mm2 and not more than three areas, the largest area does not exceed 300mm2.

Thermal stability

A, resistance to low temperature,the label  not appear warped edge,roll edge and loose.

B. resistance to high-temperature,the label  not appear warped edge,roll edge and loose.

If you have any question or demand, pls kindly send us inquiry.

One-time use 5 Gallon plastic bottle cap

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.