Ads by Google
Feature
- Used wherever fluid level has to be monitored, indicated and controlled in reliable way, especially with corrosive, toxic and inflammable fluids,
- offer a reliable, accident-free and maintenance free usage, through a simple and break-resistant construction
- Continuous and vibration resistance transfer of fluid level from the tank to the Indication even in the case of fast changing of levels.
- Possess the function that traditional glass plat / tube level gauge could not bring out eg , Switch and analog signal output
- install in any position of storage container and can get precise /reliable measurement even without any power supply.
Detail specification
| Mounting position | Vertical / Top install |
| Measure range | Max. 5500mm ( one parts ) > 5500mm ( multipart) |
| Pipe size | 57x2mm seamless |
| Process connection | flange connection/ welding of thread stud |
| Specification of flange | DN15-40 (½ -1 ½” RF) |
| Vent & drain connector | Plugged R½” |
| Resolution | 10mm 20mm 5mm |
| Enclosure | IP65 |
| Output signal | 4~20mA (HART optional) |
| Power supply | two wire 12~36VDC |
| Pipe materail | SS 304 316 |
| Flange materail | SS 304 316 carbon steel |
| Float materail | SS 304 316 |
| Operating temperature | -40~350°c |
| Operating pressure | Max 40 Bar |
| Density min | 0.35Kg/dm3 |
| Indication rail materail | ABS ABS + Aluminum AL aluminum |
| Bolts/nuts | CS SS |
| Float types | Cylindrical, sealed type |
Side mounting level gauge series
Basic type
Basic type
PP Type level gauge
Electrical heating trace type level gauge
Function principle
The principle of UHF magnetic flap level gauge lies in the float Chamber which connected to the tank, and following the law of Communicating tubes, the level in the float chamber is Equal to the level of tank, The float follows the fluid level and transmits its movements contact-free to the indication rail mounted on outside, The float has special magnet, which Rotates the wafers by 180 degree as it passes them; The result is clearly defined level indication, with the level shown in continuous red strips strongly contrasted to white above, ar increasing levels the color of wafer change from white to red and vice versa
Top mounting float level gauge series
Top mounting magnetic flap level gauge
Top mounting float level gauge
1) Function principle:
Top mounting magnetic flap level gauge is consist of body part ,top&bottom indication rail, along with magnetic flap consist of magnetic flap ,float and level transmitter, float inside storage tank move up and down follow by changing of liquids level, to enable magnet move up and downward inside indication rail through catheter, prompt body part turning plate turning with red,white color to indicate height of liquid level. at same time, transmitter output remote output signal to the control to drive control and indication of liquids level.
Certification approval
Packaging
UHF-D anti-corrosion magnetic flap level gauge