ABOUT

Wp2011-H is made by ATORTH LIGHTING,widely used in diving/scuba,camping trip, underwater R&D seabed hunting,Benefit from the innovative wireless charging technology, ATORCH LIGHTING provides you the best solution lights for diving.

FEATURES· CREE XM-L T6

· 2200mAh 4.2V Li-ion Battery· Innovative Wireless Charging System· Fully Charged in 5-7 hours· Depth Tested to 100 meters· Aircraft Grade Aluminum Alloy One Piece Construction· Superior Hard Anodized Finish· Rotary Magnetic Switch

· Exceptionally Powerful Beam

DIMENSIONSLength: 165mm Head Diameter: Ø 44mm Body Diameter: Ø 26mmWeight: 296g (Including Battery)

ACCESSORIESWireless Charger, Power Adaptor, Wrist Lanyard

OUTPUT & RUNTIME

WARNING1. Insert batteries with the positive (+) end pointing toward the flashlight head.2. Do not use lithium batteries without a protected circuit board.3. Don't collide Receiver and glass lens to avoid its broken;4. Don’t shine the light to eyes to avoid eyes hurt;5. Had better take flashlight out of the Wireless Charger if fully charged6. Take care of protecting Receiver to avoid its broken when charge or use

BATTERY INSTALLATION

Insert 1 × 18650 Li-ion with the positive (+) end pointing toward the flashlight head. Attention to battery polarity.

CHARGING

· Plug in and switch on thepower adaptor.· Carefully place the 'receiver'end into the charging base.· Charge indicator will flash green when charging (and extinguish when complete)  

WARRANTY

1.ATORCH® lightings enjoy a worldwide warranty service.2.Within14 days of purchase, any defective lights will be offered replacement (proof of purchase required) by ATORCH distributors.3.Within 12 months of receipt, ATORCH ® offers a repair service, with the exclusion of damage caused by misuse.4.As a claim exceeding 12months, ATORCH® will continue to warrant the product with the cost of parts to be borne by the customer. You may contact with your local distributor or ATORCH® directly for warranty repair queries.Please note warranty is voided by the following:1.Damage caused by disassembly or modification without permission2.Damage caused to the appearance of the product by misuse or damage (such as drops or impacts)3.Damage caused by incorrect battery insertion (reverse polarity) or battery leakage