Ads by Google
TFT screen3.5'' image reversion mirror TFT lcd display
GD40M05-GTT035KDH03-RM TFT LCD module includes:A/D board JD40M05, 3.5” Digital TFT LCD GTT035KDH03,Keypad board, Power cable and Video cableDC/ DC & LED Backlight Driver & Video Decoder All In One NTSC / PAL System automatic identifying and converting Single Operation Voltage +12.0V/5.0VVideo Signal Input All Functions can be controlled by OSD menu This product is RoHS complian
Details of this 3.5 inch Digital LCD Display Module:
1 | Size | 3.5 inch |
2 | Display ratio | 4:3 |
3 | Backlight | LED |
4 | Brightness | 300 cd/m2 |
5 | Resolution | 320(RGB) x 240 |
6 | View angle(up,down,left,right) | (40/60/60/60) |
7 | Display dimension | 76.9(W) x 63.9(H) x 3.2(D)mm |
8 | Active area | 70.08(H) x 52.56(V) |
9 | Driving board dimension | 62.0 (W) x 55.2 (H) x 9.0 (D) |
10 | Working temperature(power ripple<0.3VP-P) | Min:DC9V;Standard:DC12V;Ma x :DC15V; |
11 | Working current | (DC 12V) DC110mA±20mA |
12 | Working consumption | 1.32W(TYP) |
13 | Start time | 1.3s |
14 | Working temperature | -20~70°C |
15 | Storage temperature | -20~80°C |
16 | Humidity | 5~95%RH |
BRIGHT: When you press the <Menu> button move the cursor to the BRIGHT bar on the OSD menu, you can press <Down> button or <Up> button to adjust the image brightness value.
CONTRAST: When you press the <Menu> button move the cursor to the CONTRAST bar on the OSD menu, you can press <Down> button or <Up> button to adjust the image contrast value.
COLOR: When you press the <Menu> button move the cursor to the COLOR bar on the OSD menu, you can press <Down> button or <Up> button to adjust the image color value.
NORMAL: When you press the <Menu> button move the cursor to the NORMAL bar on the OSD menu, you can press <Down> button or <Up> button to reverse the image, and the indicator “NORMAL” on the OSD menu will be changed to be “INVERSE, MIRROR and DOWN”correspondingly, the image will be returned to original status when the indicator is NORMAL.
Notice: Important Safety Instructions1.1 The nominal voltage of DC input to the A/D board is 12V, The size of DC current depends on the TFT LCD, audio amplifier, etc. Please note that your AC/DC adapter's output plug need to match the DC input jack, the diameter of the jack is 5.5 mm.1.2 Before connecting these input/output ports, Video port, it is strongly recommended that your turn off the A/D board and remove the DC 12V plug from the DC input jack. 1.3Don't put the A/D board on the the back of LCD display or other metallic conductor without insulation in case of being burnt for short.1.4 Don’t put the A/D board into an airtight package. When it works, it will produce a certain heat.1.5 When assembling it, please use a suitable force; don’t distort the PCB and other components
Video Game DisplaySecurityPortable TVOffice ElectronicsIndustrialInstrument Display