45 Degree sland bed CNC lathe with high performance controller GSK980TD, which is compatibale with Fanuc and Mitsubishi system in Program code and operation mode, with English and Chinese languae selectable.
Standard configuration for this lathe:
English operation panel
full set English operation manual
NSK spindle bearing
Taiwan Hydraulic chuck and cylinder 6"
THK linear guideways
All component for Domestic market
Voltage: 380v 3 phase 50HZ
Brand new machine in stock 15units.
big discount sales
Specification
Item | Unit | Specification |
Max. swing over bed | mm | Φ400 |
Max. turning length | mm | 350 |
Max. turning diameter | mm | 160 |
Max. swing over slider | mm | 160 |
Spindle nose type | - | A25 |
Spindle hole diameter | mm | 43 |
Spindle speed step | - | No step |
Spindle speed range | r/min | 200-4000 |
Spindle motor power | kW | 5.5 |
Hydraulic chuck | - | 6 |
Turret | - | 8 positions hydraulic |
Tool change time | S | 0.9 |
Repeatability of Turret | Sec | ±2 |
Tool dimension | mm | |
Tailstock sleeve diameter | mm | 60 |
Tailstock sleeve taper | - | MT4 |
Tailstock sleeve travel | mm | 80 |
X axis travel | mm | 110 |
Z axis travel | mm | 380 |
X/Z rapid transverse speed | m/min | linear Guideway: 6/10 |
Machine weight | kg | 3000 |
Max. loading | kg | Disc type75;axle type300 |
CNC system | - | Guangzhou CNC GSK980TD servo |
Workpiece roughness finish | μm | Ra0.8 |
Workpiece precision | - | IT6 |
Machine dimensionL×W×H | mm | 2300×1430×1800 |
THK guideway,Hydraulic tailstock,NSK Spindle bearing. |
Special offer of CNC slant bed lathe HTC1635N