Specifications
ITEMS | UNIT | PARAMETERS | ||||
SB6140 SB6240 | SB6150B SB6250B | SB6166B SB6266B | ||||
CAPACITY | ||||||
Max.swing dia.over bed | mm | 400 | 500 | 660 | ||
Swing dia. Over cross side | mm | 220 | 300 | 420 | ||
Max. swing dia. Over gap | mm | 630 | 710 | 870 | ||
Effective length in gap | mm | 240 | ||||
Max. workpiece length | mm | 750/1000/1500/2000/3000 | ||||
Max. turning length | mm | 700/950/1450/1950/2950 | ||||
SPINDIE | ||||||
Spindle born diameter | mm | 52 B(Bserics)82,105 | ||||
Taper of spindie bore |
| NO.6 Mors no.6 | 1 /20 90 | |||
Type of spindie nose |
| ISO 702/Bayonet type B.ISO 702/ Bseries ISO 702/no.8 short cam-lock type | ||||
Spindie speeds | r/mine | 24 steps 9-1600 | ||||
FEEDS AND THREADS | ||||||
Max. travel of upper toolpost | mm | 145 | ||||
Max. teavel of lower toolpost | mm | 320 | 310 | |||
Tool section | mm | 25X25 | ||||
x-axis teedrate | m/mine | 50hz:1.9/60hz:2.3 | ||||
z-axis teedrate | m/mine | 50hz:4.5/60hz:5.4 | ||||
x-axis teeds | Mm/r | 93kinds 0.012-2.73 | ||||
z-axis teeds | Mm/r | 93kinds 0.028-6.43 | ||||
Metrice threads | Mm | 48kinds 0.5-224 | ||||
Inch threads | l.p.i | 48kinds 72-1/8 | ||||
Module therads | mm | 42kinds 0.5-112 | ||||
Diametric pitch threads | DP | 45kinds 56-1/4 | ||||
TAILSTOCK | ||||||
Diameter of quil | mm | 75 | ||||
Max. travel of quil | mm | 150 | ||||
Toper of quil(morse) |
| no.5 morse no.5 | ||||
MOTOR | ||||||
Diameter of quill | Kw | 7.5 | ||||
Max. travel of quill | Kw | 0.25 | ||||
Toper of quill(morse) | kw | 0.12 | ||||
OTHER | ||||||
Length | mm | 2382/2632/3132/3632/4632 | ||||
Width | Mm | 975 | ||||
Height | Mm | 1230 | 1270 | 1350 | ||
weight | Kg | 1975/2050/2250/2450/2850 | 2050/2100/2300/2500/2900 | 2150/2200/2400/2600/3000 | ||
Standard accessories,3 & 4 jaw chuck with base,Big steady rest, Follow rest, Face plate, Drive Plate, Full length splash guard ,
Foot brake, mechanical stop,Halogen lamp,Tools.Opt. accessories, Thread chasing dial
lathe machine