Ads by Google
MVA CCD Control System:
l PCI bus interface;
l Improved motion algorithm with better machining quality;
l Selectable pulse output frequency,160KBit/s or 1MBit/s;
l Differential output/input signals with better reliability;
l CCD Auto positioning can eliminate error of installation and silk-screen;
l Extended boards with simpler wire connection;
l Expiration limit on hardware;
l Support functions of Advance Start, Breakpoint Resume, MPG Wizard, Reverse Cutting, and so on.
**Delivery against payment. The freight is excluded in the price.Swift code: MSBCCNBJ002
Motion Control Card | |
PCIMC-6A | Servo or Stepping |
PCIMC-83A | Servo or Stepping |
Axis |
|
Maximum axis number | 3 |
Servo Driver Interface | |
Position signal | Pulse/direction |
Signal type | Differential |
Pulse frequency | 160KBit/s |
Encoder zero signal | Yes |
Servo alarm signal | Yes |
Servo enable signal | Yes |
Extended Board (may vary with type of extended board) | |
Servo cable | Yes |
Z-axis brake relay | Yes |
Work-state lamp relay | Red/Green Lamp |
Zero limit input for each axis | Yes |
External manual feed switch | Yes |
External manual control switches for feedrate percent and origin-setting | Yes |
External start/stop buttons | Start/Stop |
V9 Software Features | |
Look ahead | Yes, intelligent |
Maximum file size | 2G byte |
Feedrate percent | 0 – 120% |
Spindle rev. percent | 50 – 150% |
Simulation | Yes |
Operation mode | Auto/Serial/Increment/MDI /Reference point |
Auto centre | Yes |
Reverse cutting | Yes |
Auto open/close control valve in sequence | Yes |
open/close valve delay | Yes |
Manual pulse generator | Yes |
Chinese theme | English/Chinese (switch) |
Compensation | Backlash/Lead screw/ Quadrant |
File Formats | |
G code | Yes |
PLT format | Yes, 2D and 3D |
DXF format | Yes |
ENG format | Yes |
Others | |
Power supply | 24v DC for external I/O port |
High Precision MVA Control System