Name

Description

Photo

AUP

(Australia market)

AUP ROPS (Australian type) welded by robot, produced according to AS3610 standard, carrying working-load capacity (8KN-25KN) at the different extension: 1.83meters, 2.80meters, 3.40meters, 3.975meters, and 4.90meter with Cold galvanization.

COMPONENTS IN DETAIL:

PROP HEAD:

-150x150mm plates with holes for securing to timber beams or facilitating the use of accessories.

PROP INNER TUBE:

-48.0mm O.D, with holes at 152.5mm centers, tube diameter enables standard scaffold tube and couplers to be used for bracing purposes.

PROP OUTER TUBE:

-60.3mm O.D, bottom plate identical to prop head, reduction couplers enable standard scaffold tube to be connected to outer tube for bracing purposes.

Welding quality: all welds to be neat, clean and full penetrating to AS/BS.

Surface finishing: zinc coated

Note:

1: limit state conversion factor=1.5(2) working load limits are applicable to props.

2: Refer AS3610 for acceptable criteria in installation of props and eccentricity of loading.

TRIPODE

Folded Light duty tripod

-made by steel tube O.D 25x2.0 with three legs length max 1000mm.

-weight: 7.30kg/pc

-surface finishing: cold galvanized

Folded Standard duty tripod

-made by steel tube O.D 32x2.0 with three legs length max 1100mm.

-weight: 10.30kg/pc

-surface finishing: cold galvanized

 Folded Heavy duty tripod

-made by square tube 30x30x1.5 with three legs length max 1100mm.

-weight: 11.30kg/pc

-surface finishing: cold galvanized;