Chemical Industry Water /Oil Heating Bath
Description:
This product is made of imported stainless steel as liner. Shell made of high quality board electrostatic spray. Heating oil pipe in the middle, heating fast,high thermal efficiency, power saving, electronic cosntant temperature. We also switched the control system of the product,whether digital or table display, all eqipped the temperature control device. Oil bath shell with bladder has isolation temperature cotton protection,owns excellent insulation.
Usage:
1.Put the oil/water into the bath
2.Then connect the power, digital temperature control table shows the measured temperature.
3.Switch the knob,while observing the readings to the desired setting temperature,when the setting temperature exceeds the oil temperature,the heating indicator light on,indicatin g that the heater has begun to work,
4.When the oil temperature reaches your desired temperature. thermostat indicator light, heat light is off.
5. It should be noted that the oil in the bath are not allowed to let the heating pipe be exposed,so as not to burn the heating tube.
Technical Parameters:
Capacity(L) | 50 | pressure | 1.45MPa | Temperature contro error | <=2.50% |
Highest Temperature | 280 | power | 1.5KW | Temperature | <=2.5°C |
Heating Power(W) | 6000 | Flow rate | 18.3L/min | Humidity | 60% |
Power supply | 380V/50Hz | Adjustable range | Room-280°C | Viscosity of applied heat transfer oil | Below 500°C |
Please feel free to contact us if I can do anything for you!
Chemical Industry Water /Oil Heating Bath