Ads by Google
The JY-500VO-25L series Vacuum Drying Oven is CE certified. It can be heated up to 500°C and able to hold the temperature for long period with the support of compact chilling water recirculating system. A 50-500ml flow meter is installed in the front panel for user to simply control and create a gas environment in the chamber. All necessary accessories are in the package including vacuum pump, chiller, fittings, hoses, etc.
Features of Vacuum Drying Oven:
1) Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.
2) 3" (7.6 cm) glass wool insulation prevents heat loss from working chamber
3) Silicone door gasket and positive latch door maintain seal at all vacuum levels
4) Exclusive polycarbonate safety shield protects door glass
5) 28 segments programmable digital temperature controller with +/- 1.5°C accuracy
6) Maximum Heating Rate: 4~6 ºC/min
7) Vacuum fittings require .25" (6.35 mm) I.D. tubing
8) Easy-to-clean #304 stainless steel chamber interior
9) 2 stainless steel shelves were included for immediate use
10) Vacuum and air lines constructed with corrosion-resistant stainless steel tubing for optimum chamber cleanliness and long term performance.
Specifications:
Voltage | 110VAC |
Power | 1800W |
Heating Temp | Continuous: 50~500°C |
Chamber and Door | Chamber dimensions: 300mmx300mmx275mm (12x12x11", 25Liter ) The chamber is structured with stainless steel and welded with bracing pieces.Silicone door gasket and positive latch door ensure the good sealing2 stainless steel shelves are included to facilitate processing efficiency. |
Temperature Controller | 28 segments programmableBuilt-in over-temperature protection+/- 5°C accuracy |
Gas flowing/purging | A precise flow meter is installed in the front panel which ranges from 50 ~ 500ml/min. The gas is able to be continuously flowing into the chamber at a constant flow rate defined by user during operation.The oven can be purged by inert gas before operation. |
Water Cooling | One Digital Temperature Controlled Recirculating Water Chiller is includedo Refrigeration range : 5~35°Co Floowing Rate: 16L/minuteSuggest using anti-corrosion coolant (available for auto-part store) to achieve best water cooling.The water cooling jacket is built inside the oven door. |
Fittings & Connectors | One KF25D vacuum port is used for quick connection to vacuum pump. Two water/coolant inets connects the chiller. (tubes are included)One 1/4" swagelok tube fittings is for inert gas supply.One needle valve is used to control the input gas |
Vacuum Pump | One Dual stage vacuum pump with with Exhaust Filter is included.Vacuum level of oven after pumping < 133pa (2 torr)Power: 3/4HP 550W |
Dimensions | Oven: 590 x 490 x 450 mm(24" x 20" x 18") (L x W x H) Chiller: 550 X 280 X 430 mm (L x W x H) |
Certification | CE certified |
Warranty | 3 years limited manufacture warranty (Comsumable parts such as silicon gaskets are not covered by the warranty) |
Standard Package:
Name | Qty |
High temp. Vacuum oven (12 x 12 x 11", 25L, 400°C) | 1 |
Digital Tempeature Controlled Recirculating Water Chiller with 6 Liters Tank, 16L / min Flow | 1 |
Ø12mm Polyurethane tube | 2 |
Stainless steel shelves | 2 |
Power cord Dual stage vacuum pump with with Exhaust Filter, Flexible Stainless Steel Vacuum Hose ( Bellows ), 1 meter Two sets Quick Clamp with Rubber O-Ring | 1 set |
Vacuum Drying Oven Operation:
1) For using under vacuum, it is necessary to have the vacuum pump
2) 28 segments temperature profile programmable
3) Vacuum level displayed on gauges from 0 to 30" Hg
4) PID precision Digital Power controller controls temperature with a uniformity of +/-5°C@ 100°C; 25" Hg at center hot zone, 6'x6' center area only ) and built-in over temperature protection
JY-500VO 25L High Efficency Desktop Vacuum Drying Oven