Hot Cutter is a professional-grade hot cutting tool for foamed plastics

HICHOICE Hot Knife is a professional-grade hot cutting tool for nylon wire or tape, foamed plastics and other plastic parts. HICHOICE Hot Knife heats up in seconds and gives the operator temperature control. Never before has working with nylon wire or tape been this easy, inexpensive and free of mess.

Technical Data

Specified Voltage: 220V-240V Frequency: 50 Hz

Rated Power : 90W Working Temperature: 100°C-600°C

Operation

1. Choose the blade according to your material.2. Put the blade into the blade stand ,then tighten the six screws up3. Turn on power, red indicators show the machine is ok

Caution: If the blade be putted wrong , it will cannot be heated .

4. Change the Temperature, make the blade touch with the material.5. Turn on power, cut the material after seconds.

Pls note: before turn on power, the blade need touch with the material.

6. When use the tool ,Do not use the metal to touch the blade7. The brush can move the matter on the blade

 

NOTE:

Using the tool in ventilated environmental conditionDo not heating the blade without touch the material.When use the tool, do not touch the bladeAfter cool the blade , can take down the blade

kingchoice hot knife, hot cutter, heating cutter