WIND/SOLAR HYBRID CONTROLLER AND INVERTER
TECHNICAL SPECIFICATIONS
Model | WWSI0505-24 | WWSI0610-24 | WWSI1010-48 |
Picture | |||
Inverter Rated Output Capacity | 0.5KVA | 1kVA | |
PV Charge Current | 10A | 15A | 10A |
Rate Wind Turbine Power | 500W | 600W | 1000W |
Rated Battery Voltage | 24 VDC | 48VDC | |
Floating Charge Voltage | 30 VDC | 60 VDC | |
Over Voltage Point | 34 VDC | 68 VDC | |
Over Voltag Recovery Point | 33 VDC | 66 VDC | |
Under Voltage Point | 21 VDC | 42 VDC | |
Under Voltag Recovery Point | 24 VDC | 48 VDC | |
No Load Loss | 0.6A | 0.5A | 1.3A |
Output Waveform | Pure Sine Wave | ||
Display Mode | LCD | ||
Display Parameter | Battery Voltage, Charging Current, state parameter | ||
Cooling Method | Fan | ||
Rated Output Voltage | 110/120/220/230/240 VAC | ||
Total Harmonic Distortion | ≤4% | ||
Output Frequency | 50/60 Hz±0.05Hz | ||
Overload Ability | 120% one minute,150% 10 seconds | ||
Inverting Efficiency | Max. 90% | ||
Noise(1m) | ≤40dB | ||
Dielectric Strength | 1500VAC, one minute | ||
Protection Type | Solar panel reverse-charge protection、Solar panel reverse-connect protection、Battery over voltage protection、Battery under voltage protection、Battery reverse-connect protection、Output over load protection、Output short curcuit protection、Over temperature protection、Wind turbine automatic brake and Manual brake protection | ||
Operation Ambient Temperature | -20~50°C | ||
Operation Altitude | ≤4000m | ||
Operation Ambient Humidity | 0~90%,no condensing | ||
Size(W×H×D)mm | 430×200×370 | 470×230×410 | |
Weight(KG) | 11.5 Kg | 15.5 |
WIND/SOLAR HYBRID CONTROLLER AND INVERTER