1. DIN-rail mount, terminal block, 3000V isolation
2. Transmit distance can reach up to 1800M at the rate of 9.6kbps.
SW485SGI/C is our top-of-the-line converters with both isolation and surge protection, enclosed terminal blocks for tamper resistance and dip switches for configuration. Isolated power and ground generated internally. LEDs indicate data traffic. SW485GI/C is a basic isolated converter.The RS-422/485 side and the RS232 side is powered by an external power supply.Features1. DIN-rail mount, terminal block, 9-36VDC external power, 3000V isolation2. Transmit distance reach up to 1800M at the rate of 9.6kbps3. Adopt DIP switch setup, random switch RS-485/RS-422 interface4. Automatic send data control, auto distinguish and sense direction adout data transfer5. Auto sense serial signal rate, zero delay automatic transmitCommunication
| Standard | Accord EIA RS232, RS-485, RS-422 standard |
| RS-232 signal | TX, RX, GND |
| RS-485 signal | D+, D-, GND |
| RS-422 signal | R+, R-, T+, T-, GND |
| Working format | Asynchronism, point to point or multi-point, 2 line half duplex, 4 line duplex |
| Direction | Automatic Send Data Control-no software drivers needs |
| Baud rate | 300-115200bps, automatic test signal rate |
| Loading | Support 32 port loop environment(or handtailor 128 point) |
| Protection | 600W surge protection, 15KV static electricity protection |
| Isolation | 3000V |
| Connector | RS-485 port 3 industrial terminal block, RS-422 port 5 industrial terminal block |
Environment
| Working temperature | -40 to 80 |
| Storage temperature | -40 to 85 |
| Humidity | Relative humidity 5% to 95% |
Power
| Input powered | 9-36VDC external powered |
| Consumption | Static consumption less than 100mA, dynamic average consumption less than 300mA |
Dimension
| L*W*H | 100mm×69mm×22mm |
| Shell | Iron |
| Color | White |
| Weight | 170g |
Update Date:2012-04-24 04:50:14
RS-232 to RS485/422 converter(Industrial isolation)
