FT232RL New and original in stock.

,

Features

feature

Single chip USB to asynchronous serial data transfer interface. Entire USB protocol handled on the chip - No USB-specific firmware programming required. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity. Fully assisted hardware or X-On / X-Off software handshaking. Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232). In-built support for event characters and line break condition. New USB FTDIChip-ID feature. New configurable CBUS I/O pins. Auto transmit buffer control for RS485 applications. Transmit and receive LED drive signals. New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA. FIFO receive and transmit buffers for high data throughput. 256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput. Adjustable receive buffer timeout. Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes. New CBUS bit bang mode option. Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings. Device supplied preprogrammed with unique USB serial number. Support for USB suspend / resume. Support for bus powered, self powered, and high-power bus powered USB configurations. Integrated 3.3V level converter for USB I/O . Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic. True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input. High I/O pin output drive option. Integrated USB resistors. Integrated power-on-reset circuit. Fully integrated clock - no external crystal, oscillator, or resonator required. Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required. UART signal inversion option. USB bulk transfer mode. 3.3V to 5.25V Single Supply Operation. Low operating and USB suspend current. Low USB bandwidth consumption. UHCI / OHCI / EHCI host controller compatible. USB 2.0 Full Speed compatible. -40°C to 85°C extended operating temperature range. Available in compact Pb-free 28 Pin SSOP and QFN-32 packages (both RoHS compliant). W e accept  the Paypal/ Western union/ /TT, you can choose you like. Also  We accept Escrow for payment. but beyond 400USD per orderWe will send the goods within 2 days after buyer's payment We will responsible for the China customs problem and buyer should be responsible for the destination customs problem We provide EMS,DHL,UPS, or Airmail for shipping method.express shipping usually take 3-5 working days depends on the country delivered to.

   4.If other shipping ways are preferred, contact us and we will use your  ways. We will give you track number when we send the products out,so you can check it in line.

5. Please check out your ADDRESS carefully when processing order

1.  We test it before ship out All of the products be make sure working well and then sent out . 

2..we can change within one month, But you should pay the freight from your country to China.Than  we will  change for you.but the freight is paid a half each.if the damage is man-made,we don't afford it .

All emails will be answered within 24 hours.,Please leave a message in the Trade Manager.

 Thank you for ordering and hope you like your purchase here.You comment is very important in our business success.

 

in stock FT232RL / USB uart IC