Ads by Google
2012 NEW AUNE T1 24bit/96kHz Tube Amplifier USB Decoder &6N11 Standard Version
Description:
Appearance Introduction:
First of all, as a product of the bile duct design, packaging is still very important, the packaging of this product is still very tight, and you can see some important information on the packaging, such as aircraft to support 24BIT audio decoder, ear put the decoding of jack and USB interface.
AUNE T1 Packing Box
Inside the box of Aune T1
Open the package to see the inside of the protective layer filled by the EPE ,there are the Aune T1 ,a USB cable,power supply and one tube.
Accessories of Aune T1
As to Bile duct, Aune manufacturers said that the Standard Edition distribution 6N11 tube.
Appearance of Aune T1
Two colors:black and silver
The appearance of this aune T1 uses brushed metal material, it will be black and white colors. Assembled, the frame of the bile duct and bile duct are very beautiful, and this design can also be good to avoid burns caused by the unwitting non-user groups of onlookers. In the lower right of the fuselage for the volume adjustment button and input selector button, the user can select one USB DAC and headphone amplifier, or line input of pure amp.
Interface and Features
The interface on the back
In addition to the USB port on the back there are a group of analog output and analog input, but also were used as pure pure DAC and amp when the user can separate connection to an external amp or decoder to use more this the playability of the product.
Power Supply and Connector Pins
In addition to these interfaces, the back is the switch and power connector, the power supply the aune of T1 does not use ordinary power connector, but the use is not common five-pin power connector, I believe that such a shunt input the power supply also has a better guarantee, making the better the sound.
the bottom of the aune T1 uses 3M silicone spikes, as well as gain switch
At the bottom of the machine, the machine feet is selected 3M silicone machine foot addition to prevent the machine at the bottom of scratch desktop, it also brings a good shock absorber. And at the bottom, you can see four switches, which is a design highlight of this product, the machine has an adjustable gain design. When the switch 1 and 2 in the OFF state, a gain of 0dB; when switch 1 is ON and 2 is OFF, a gain of 10DB; 1 and 2 switch is ON, is the largest 16DB gain. The two groups 1 and 2 switch the left and right channels of the amplifier module, and need the same gain setting. Gain settings, users can select the appropriate gain according to their own devices, and gain for headphones, earbuds or just right is the most appropriate and do not necessarily gain greater the sound will be
excellent.
This product is used the two well-known chip as the core part of the audio, digital signal conversion using well-known TE-7022 chip chip in the market a lot of built-in USB interface decoder used digital conversion chip support to 24BIT-96KHZ, and the data is pristine, and the sense of hearing is very soft.
beautiful holder wih lamp of Aune T1
Specifications:
• Split power supply design
Using high-quality linear power supply, five core external power connector, dual power supply, large-capacity capacitor filter and more effective to reduce power supply noise
• New circuit architecture modular design
Modular functional design, the independent power supply modules at all levels using high-quality regulator chip, effectively avoiding the crosstalk between the signal;
Intimate delay protection design, delay access to the amp and shut down quickly to disconnect , avoiding completely the impact of the DC output of the switch machine instantly circuit imbalance to protect your expensive headphones and speakers;
• tube buffer stage design
Use Dawn of high-quality 6N11 vacuum tube, vacuum tube warm sound and digital audio complement each other, elegant white tones warm hearts! • careful component selection
Use high quality components, and Japan ALPS potentiometer, the German WIMA capacitors, four precision chip resistors, sound special ENLA electrolytic capacitors, tube, USB port, RCA terminals are gold-plated material, full ON regulator device.
Amp output gain adjustment, replace the amp module
Amp specifically designed for replaceable modules, in particular, to increase the output gain adjustment switch, you can push a variety of sensitivity headphones, optional wide range of headphones!
Parameter:
| product | T1 24BIT TUBE USB DAC |
| Color | silver , black |
| Weight | 2KG |
| Size | 15.5*9.7*4cm |
| Frequency response | 20hz-20khz |
| Signal to noise Ratio | >=120db |
| Lint out | 2Vrms |
| Suitable headphone Impedance | 30ohm~600ohm |
| Headphone Amp output | (biggest is 20V) 32ohm--1000MW ,120ohm--400MW ,300ohm--150MW |
| Line out insider impedance | 100ohm |
| USB support | 24bit/96kHz |
| Input jack | analog RCA jack*1 , USB jack *1 |
| Output jack | analog RCA jack *1 , 6.5mm jack *1 Unpack : T1 24bit tube USB DAC ,power adapter(220/110V) ,PC USB cable , 6.5mm to 3.5mm stereo F adapter , User manual. |
| Headphone amp insider impedance | 10ohm |
| Headphone Amp part AP measured curves | (tube output test) |
Packing detail:
USB cable
power supply
6.5mm to 3.5mm stereo plug adapter
Users Manual
warranty card
2012 NEW AUNE 6N11 Standard Version T1 24bit/96kHz Black/Silver Tube Amplifier USB Decoder