Hydraulic Press for Connecting the Insulators, China Suppliers and Manufacturers

Hydraulic Press for Connecting the Insulators

Supplier Info

Cangzhou Jiasheng Hydraulic And Pneumatic Equipment Co., Ltd.

[China Supplier]

Contact Person : Ms. Q Camy

Tel : 86-024-25691356

Fax : 86-024-25691356

Product Detail

Frame type, the inner hole and four pillars holes are working together..

1 Frame type, the inner hole and four pillars holes are working together. The seal of the cylinder can endure the high press and have wear resistance, to make sure the deformation will not happen. The cone sleeve is oxidative with cold mould. The mould is heat treated in vacuum.2 The system adopts two hydraulic was to achieve fast giving. To provide the high quality, the hydraulic valve is imported from Taiwan. To low down the noise we install the vane pump.3 The operating system comes from Omron, Japan and the human interface comes from Eview, Taiwan.4 The acoustic emission passed the USA Inspection System, so the accuracy is high and the curve is shown clearly.

The Moulds’Specification and Corresponding Metal’s Specification, as Follow:

insulator grade	Mould specifications		Corresponding metal specifications
insulator grade	Length	Internal diameter	Crimp length	Metal external diameter
70KN	40	28.5±0.01	40	29
100KN	55	31.5±0.01	55	32
160KN	80	39.5±0.01	80	40
210KN	80	39.5±0.01	80	40
300KN	Pressure Sec 50	45.5±0.01	100	46

Technical parameters:

Model	JSJY6000-B
The greatest pressure relay	6000KN
Scope of work	Applicable to all the hanging-insulator Press, 210 KN Crimp following a successful, more than 210 KN insulator Sec Crimp
Maximum working pressure	20MPa
Die opening of the main work	170/340
Die	Two sets (specifications for the 70 KN, 100KN ,160-210kn, 300KN)
Host weight	About 2800Kg
Crimp the form of operation	Manual, semi-automatic, footswitch
Control Method	Computer Control (with acoustic emission testing system)

Hydraulic Press for Connecting the Insulators