designed exclusively for the aluminum-alloy lift table consists of high pressure gear pump, AC motor, multi-functional manifold

General Description

This power unit is designed exclusively for the aluminum-alloy lift table. Which consists of high pressure gear pump, AC motor, multi-functional manifold, valve, tank, and etc, The lowing movement is activated by the solenoid valve or manual lever valve with the speed controlled by the flow control valve.Special Notes1. The duty of this power unit is S3, I. E., which can be only be worked uninterruptedly, I. E., 1 minute on and 9 minutes off.2. Clean all the hydraulic parts concerned before mounting the power unit3. The viscosity of the hydraulic oil should be 15~68 cst, which should also be clean and free of impurities. N46 hydraulic oil is recommended.4. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.5. The power unit should be mounted horizontally.

Model	Motor Volt	Motor Power	Rated Speed	Displacement	System Pressure	Tank Capacity
HPU-F2.1C3G56/1	220VDC	1.5KW	1400RPM	2.1mL/r	20MPa	8L

Lift Table Power Units 4 for scissors lifting table