E6 programming underfloor heating thermostat with LCD screen 1.CE ISO certificate 2.Daily programming set 3.Fast delivery

 E6 24 hours programming underfloor heating thermostat with LCD screen

                                                   Introduction The E6 is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostatThe thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

                                                    ApplicationFor the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...

FeaturesOn/off control output for heating device Symbol indicator when heating is onTemperature limitation function for protecting the wooden floor Current room temperature displaying when the thermostat is switched-off Potential-free output for Boiler, Pump,Key-lock function for protecting the setted parameters (especially suitable for Public Places)

Technical data

Voltage:220V/230VPower comsuption:2WSetting  range:10~55celsius(can adjust to 5-90celsius)External limitation:5...60celsius(factor seting 35celsius)Switch differential:0.5-10celsius adjustable                        factory setting±1 celsiusAmbient temperature:-5~50 celsiusProtective houseing:IP20 Housing material: anti-flammable PC

Selection Table

 

Model	Current	Application
E62.113	3A	Built-in&floor sensor,floor limit sensor
E62.123	3A	Built-in&floor sensor,floor limit sensor,a potential-free output
E62.116	16A	Built-in&floor sensor,floor limit sensor,Cable heating