Ads by Google
the basic layer of film doesn't melt at laminating temperature.It is produced through the extrusion coating process.where the adhesive is applied to the film.when heated,the adhesive melts to a tacky condition where is married to the printed sheet under extreme pressure.when cooled to a solid again.the adhesive provides a high strenght chemical bond.our adhesives give superior bond strengths on a wide variety of subject material.such as paper,board,metal ,plastics,etc
Bopp thermal lamination film Gloss & Matt) |
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| |||
SPECIFICATION & PARAMETER |
|
| ||||||||||
SPECIFICATION | 24MIC GLOSS | 27MIC GLOSS | 30MIC GLOSS | 25MIC MATT | 27MIC MATT | 30MIC MATT | ||||||
THICKNESS(UM) | BASE | 12 | 15 | 18 | 15 | 15 | 18 | |||||
EVA | 12 | 12 | 12 | 10 | 12 | 12 | ||||||
TOTAL | 24 | 27 | 30 | 25 | 27 | 30 | ||||||
WEIGHT | /kg | 45.04 | 40.1 | 36.15 | 44.24 | 40.84 | 36.87 | |||||
kg/ | 0.222 | 0.025 | 0.02766 | 0.0226 | 0.02448 | 0.02712 | ||||||
Width | 140 190 200 360 390 440 540 590 780 880 1080 1320 1400 1600 1800 Upon customers requirement | |||||||||||
Lenghth | 300 - 6,000 more or less 10% allowed | |||||||||||
Corona Treatment Side |
ONE SIDE
| BOTH SIDE |
| |||||||||
Connector | 2 Less than 2 | |||||||||||
TENSILE STRENGTH | MD:3.1*106 dyne/cm CD:6.1*106 DYNE/cm | |||||||||||
Paper Core(inter Dia | 25.4mm(1 inch);58mm(2.25 inch);76mm(3 inch) | |||||||||||